Thẻ chiến lược: Nhận được IP sạch nhất có thể
Chào mừng đến với một kiến thức về thẻ khác mà bạn không biết là mình cần. Hôm nay chúng ta sẽ đi sâu vào thế giới bẩn thỉu của các nhà cung cấp proxy và cách tận dụng từng giọt giá trị cuối cùng từ cái gọi là IP "sạch" của họ.
Bạn thấy đấy, hầu hết những người mới vào nghề đều nghĩ rằng mình đã trúng số độc đắc khi tìm được một nhà cung cấp proxy dân dụng chưa từng được sử dụng bởi bất kỳ đứa trẻ nào có thẻ tín dụng bị đánh cắp. Nhưng sự thật là: ngay cả những hồ bơi sạch nhất cũng trở nên bẩn hơn và không sử dụng được sau một thời gian.
Bí mật? Không phải là tìm IP còn nguyên vẹn. Mà là hiểu cách các nhà cung cấp proxy này hoạt động và khai thác điểm yếu của họ. Chúng ta đang nói đến những mánh khóe nhỏ lén lút thao túng DNS cho phép bạn vượt qua các khối và hạn chế của họ.
Đây không phải là '5 bước dễ dàng để thanh toán bằng thẻ Amazon. Chúng ta sẽ đi sâu vào các vấn đề kỹ thuật để khám phá cách bỏ qua các khối URL trên các trang web tài chính như Stripe và PayPal . Đến cuối hướng dẫn này, bạn sẽ thấy proxy dân dụng dưới một góc nhìn hoàn toàn mới.
Vậy nên hãy đội mũ suy nghĩ của bạn lên và bỏ lại những định kiến của bạn ở ngoài cửa. Đã đến lúc học cách biến những 'IP sạch' đó thành sân chơi cá nhân của bạn. Đây là thứ nâng cao nhưng nếu bạn có nhiều hơn hai tế bào não để cọ xát với nhau, bạn sẽ làm được. Bắt đầu thôi!
IP bị bẩn như thế nào
Vậy tại sao proxy sạch của bạn lại không hoạt động? Chúng ta cần xem cách các nhà cung cấp proxy quản lý nhóm IP của họ. Họ có danh sách lớn các địa chỉ IP mà họ bán cho khách hàng của mình dưới dạng proxy.
Khi nhà cung cấp nhận được một loạt IP mới, chúng sẽ sạch và không được sử dụng. Nhưng điều đó không kéo dài lâu. Ngay khi những IP đó khả dụng, chúng sẽ được nhiều khách hàng khác nhau sử dụng, bao gồm cả những người làm thẻ thực hiện giao dịch gian lận.
Vấn đề là số lượng lớn người dùng truy cập vào cùng một trang web có hoạt động gian lận . Mỗi lần thử không thành công, khiếu nại hoặc giao dịch đáng ngờ trên một địa chỉ IP đều để lại dấu vết. Những dấu vết đó tăng nhanh và làm giảm IP.
IP mà bạn vừa kết nối có thể đã được nhiều người khác sử dụng trước bạn. Họ có thể đã cố gắng thẻ nhiều trang thương mại điện tử khác nhau hoặc sử dụng bộ xử lý thanh toán như Stripe cho các giao dịch mờ ám. Tất cả các hoạt động này đều để lại dấu vết kỹ thuật số gây ra cảnh báo trong hệ thống bảo mật .
Đây là lý do tại sao bạn có thể chạy IP thông qua IPQS hoặc Scamalytics , nhận được kết quả sạch và vẫn có đơn hàng bị từ chối. Những kiểm tra ở mức bề mặt đó không hiển thị toàn bộ lịch sử hoạt động đáng ngờ trên IP đó trên các nền tảng khác nhau.
Một IP có thể nhanh chóng bị hỏng. Một IP sạch vào buổi sáng có thể bị xâm phạm vào buổi chiều do những người dùng khác. Chu kỳ sử dụng và lạm dụng này khiến việc tìm ra các IP thực sự sạch trở nên khó khăn hơn. Khi một nhà cung cấp proxy có danh tiếng là có một nhóm sạch, nhiều người dùng hơn sẽ đến và chất lượng IP giảm nhanh hơn.
Vì vậy, khi đơn hàng của bạn bị đánh dấu mặc dù sử dụng proxy được cho là 'sạch', hãy nhớ rằng bạn không chỉ phải đối mặt với các hệ thống phát hiện gian lận . Bạn cũng phải đối mặt với tác động tích lũy của mọi lần thử thanh toán thẻ không thành công trước đó trên IP đó.
Giải pháp
Giải pháp cho vấn đề chất lượng IP này rất đơn giản: sử dụng các nhà cung cấp proxy chặn các trang web tài chính . Các nhà cung cấp này, phục vụ cho các trường hợp sử dụng hợp pháp hơn, chặn các bộ xử lý thanh toán và các tổ chức tài chính . Hạn chế này, mặc dù bất tiện, nhưng lại là một mỏ vàng đối với chúng tôi.
Tại sao? Bởi vì những hạn chế này tạo ra một lá chắn, ngăn chặn những người chơi thẻ khác làm ô nhiễm nhóm IP. Nếu proxy không cho phép kết nối đến Stripe , PayPal hoặc Adyen , điều đó có nghĩa là không ai sử dụng các IP này cho các giao dịch gian lận trên các nền tảng này. Kết quả là? Địa chỉ IP vẫn sạch trong mắt các nhà cung cấp dịch vụ thanh toán và hệ thống phát hiện gian lận .
Cách tiếp cận này mang lại cho chúng ta một lợi thế đáng kể. Chúng ta không còn chơi trò roulette Nga với các IP đã bị mọi Tom Dick và Harry lạm dụng khi cố gắng kiếm tiền bằng thẻ để có được một chiếc PlayStation mới . Thay vào đó, chúng ta làm việc với các IP có bảng trắng khi nói đến các giao dịch tài chính .
Nhưng d0ctrine nếu các nhà cung cấp proxy này không cho phép truy cập vào Stripe , PayPal , Adyen, v.v. thì làm sao chúng ta có thể sử dụng chúng? Câu hỏi hay. Câu trả lời nằm ở một số phép thuật DNS .
Bằng cách sử dụng các thủ thuật DNS cụ thể , chúng ta có thể bỏ qua những hạn chế này trong khi vẫn được hưởng lợi từ danh tiếng trong sạch của các IP này. Phương pháp này cho phép chúng ta truy cập vào các trang web cần thiết trong khi vẫn duy trì trạng thái nguyên sơ của các IP proxy của chúng ta .
DNS
Để hiểu cách chúng ta có thể vượt qua những rào cản của trang web tài chính này , chúng ta cần hiểu về DNS ( Hệ thống tên miền ) và cách nó tương tác với các loại proxy khác nhau .
DNS là danh bạ điện thoại của internet, nó dịch tên miền mà con người có thể đọc được thành địa chỉ IP mà máy tính sử dụng. Hầu hết các nhà cung cấp proxy triển khai các khối URL của họ ở cấp độ DNS . Họ không chặn trực tiếp địa chỉ IP của các trang web tài chính , mà chặn trình phân giải DNS của họ khỏi việc dịch một số tên miền nhất định .
Ví dụ, khi một proxy cố gắng truy cập api.stripe.com, trình phân giải DNS của nhà cung cấp trả về một giá trị trống thay vì địa chỉ IP thực tế của Stripe . Đó là lý do tại sao bạn không thể truy cập các trang web này thông qua các proxy 'sạch' này trong những trường hợp bình thường.
View attachment 5976
Đây là nơi các loại proxy xuất hiện. Với proxy HTTP, việc phân giải DNS diễn ra ở phía máy chủ proxy , khiến việc vượt qua các rào cản của chúng trở nên khó khăn. Nhưng với proxy SOCKS5 , chúng ta có một cơ hội vàng.
Proxy SOCKS5 hoạt động ở cấp độ mạng thấp hơn , chúng ta có nhiều sự linh hoạt hơn trong cách xử lý lưu lượng . Theo mặc định, bạn đang sử dụng trình phân giải DNS của proxy . Nhưng - và đây là chìa khóa - với SOCKS5 , chúng ta có thể thay đổi điều đó. Chúng ta có thể cấu hình hệ thống của mình để sử dụng trình phân giải DNS khác , trình phân giải không có các khối này.
Vì vậy, chúng ta có thể sử dụng các proxy SOCKS5 sạch, không bị ô nhiễm này và vẫn có thể truy cập vào các trang web tài chính mà chúng ta cần. Về cơ bản, chúng ta đang bỏ qua danh bạ điện thoại của proxy và sử dụng danh bạ của riêng chúng ta.
Quá trình
Bây giờ chúng ta đã tìm hiểu lý thuyết, hãy cùng đi sâu vào thực tế để thực hiện việc bỏ qua này. Bạn sẽ cần ba thứ:
- Trình duyệt chống phát hiện với khả năng thay đổi DNS
- Nhà cung cấp proxy chặn các trang web tài chính
- Một trình phân giải DNS bên ngoài đáng tin cậy
Đối với trình duyệt chống phát hiện, GoLogin và Linken Sphere là những lựa chọn tốt. Cả hai đều có tùy chọn cấu hình DNS cho phương pháp của chúng tôi.
Đối với các nhà cung cấp proxy, hãy tìm những nhà cung cấp chặn các trang web tài chính. Oxylabs và IPProyal là những ví dụ điển hình. Những hạn chế của họ thường gây phiền toái nhưng lại trở thành lợi thế của chúng ta trong trường hợp này.
Đối với DNS bên ngoài, chúng tôi sẽ sử dụng trình phân giải của Cloudflare (1.1.1.1). Nó nhanh, đáng tin cậy và quan trọng nhất là không liên kết với bất kỳ dịch vụ proxy nào .
Sau đây là quy trình từng bước:
Khi bạn truy cập vào api.stripe.com , bạn sẽ thấy phản hồi JSON trông như thế này:
- Thiết lập hồ sơ chống phát hiện của bạn :
- Khởi chạy trình duyệt chống phát hiện của bạn ( GoLogin hoặc Linken Sphere )
- Tạo hồ sơ trình duyệt mới
- Trong cài đặt mạng, hãy tìm tùy chọn cấu hình DNS
- Nhập Cloudflares DNS : 1.1.1.1 và 1.0.0.1 làm chính và phụ
- Cấu hình proxy SOCKS5 của bạn :
- Đảm bảo rằng 'Sử dụng proxy DNS' đã bị vô hiệu hóa - điều này rất quan trọng
- Trong cùng một cài đặt cấu hình xác định vị trí cấu hình proxy
- Chọn SOCKS5 làm loại proxy
- Nhập thông tin chi tiết được cung cấp bởi dịch vụ proxy của bạn ( Oxylabs hoặc IPProyal )
- Kiểm tra thiết lập của bạn :
- Khởi chạy hồ sơ trình duyệt
- Truy cập ipleak.net để xác nhận bạn đang sử dụng IP proxy
- Thử truy cập api.stripe.com
* Văn bản ẩn: không thể trích dẫn. *
Phản hồi này chính xác là những gì chúng tôi muốn thấy. Điều đó có nghĩa là bạn đã kết nối thành công đến máy chủ API Stripes mặc dù nhà cung cấp proxy đã chặn nó. Thông báo lỗi không liên quan - chúng tôi không cố gắng thực hiện lệnh gọi API hợp lệ. Điều quan trọng là bạn đã nhận được phản hồi từ Stripe .
Nếu bạn thấy thông báo này, congratu-fucking-lations . Bạn vừa bỏ qua được lệnh chặn DNS của nhà cung cấp proxy . Bây giờ bạn đang kết nối với Stripe thông qua một IP mà theo mọi lý lẽ, không thể truy cập được.
Nếu bạn không thấy thông báo này mà thay vào đó nhận được lỗi kết nối hoặc thời gian chờ, có gì đó không ổn. Kiểm tra lại cài đặt DNS và cấu hình proxy của bạn . Đảm bảo rằng 'Sử dụng proxy DNS' đã bị vô hiệu hóa và bạn đang sử dụng proxy SOCKS5 , không phải HTTP .
Từ đây trở đi, bạn có khả năng có một địa chỉ IP sạch cho các hoạt động thanh toán bằng thẻ của mình . Tuy nhiên, đừng vội tự mãn. Mặc dù phương pháp này đảm bảo IP của bạn không bị sử dụng cho mục đích gian lận tài chính , nhưng nó không đảm bảo tính sạch sẽ tổng thể.
Kiểm tra lại IP của bạn bằng các dịch vụ như IPQS và Scamalytics . Chỉ vì nó sạch với bộ xử lý thanh toán không có nghĩa là nó sạch trên mọi phương diện. Những IP này vẫn có thể được sử dụng cho những thứ vớ vẩn khác như botnet hoặc chiến dịch spam .
Suy nghĩ kết thúc
Chúng tôi vừa trang bị cho bạn một phương pháp để truy cập vào các IP sạch hơn, nhưng đây không phải là giải pháp hoàn hảo. Đây là một công cụ đòi hỏi kỹ năng và sự cảnh giác.
Nhớ:
- Xoay vòng IP thường xuyên
- Đừng lạm dụng thủ thuật này
- Duy trì OPSEC nghiêm ngặt
Phát hiện gian lận liên tục phát triển. Hãy luôn nhạy bén, thích nghi và đừng bao giờ tự mãn. Kiến thức là sức mạnh, nhưng ứng dụng là chìa khóa.
Hãy sử dụng điều này một cách khôn ngoan và hy vọng nỗ lực đánh bài của bạn sẽ thành công. Giờ thì hãy kiếm tiền đi.
d0ctrine ra.
Virtual Carding 🌐 Getting the Cleanest Possible IPs for Carding (METHOD) 🌐
Dziamandzis
Newbie
- Joined
- 06.03.25
- Messages
- 2
- Reaction score
- 0
- Points
- 1
Thx
Welcome to another carding knowledge you didnt know you needed. Today were diving into the dirty world of proxy providers and how to get every last drop of value out of their so called “clean” IPs.
You see most of you noobs think youve hit the jackpot when you find a residential proxy provider that hasnt been used to death by every script kiddie with a stolen credit card. But heres the truth: even the cleanest pools get dirtier and unusable after awhile.
The secret? Its not about finding virgin IPs. Its about understanding how these proxy providers work and exploiting their weaknesses. Were talking DNS manipulation sneaky little tricks that let you get past their blocks and restrictions.
This isnt some ‘5 Easy Steps to Card Amazon crap. Were going deep into the technical weeds exploring how to bypass URL blocks on financial sites like Stripe and PayPal. By the end of this guide youll be seeing residential proxies in a whole new light.
So put on your thinking cap and leave your preconceptions at the door. Its time to learn how to turn those ‘clean IPs into your personal playground. This is advanced stuff but if youve got more than two brain cells to rub together youll manage. Lets fucking go!
How IPs Get Dirty
So why are your clean proxies failing? We need to look at how proxy providers manage their IP pools. They have huge lists of IP addresses they sell to their customers as proxies.
When a provider gets a new batch of IPs, they are clean and unused. But that doesnt last long. As soon as those IPs become available, they get used by various customers, including carders doing fraudulent transactions.
The problem is the sheer number of users all hitting the same websites with fraudulent activity. Each failed attempt, chargeback or suspicious transaction on an IP address leaves a mark. Those marks add up fast and degrade the IP.
The IP you just connected to has likely been used by numerous other carders before you. They may have attempted to card various e-commerce sites or used payment processors like Stripe for shady transactions. All of these activities leave digital footprints that raise flags in security systems.
This is why you can run an IP through IPQS or Scamalytics, get a clean result and still have your orders declined. Those surface level checks dont show the full history of suspicious activity on that IP across different platforms.
An IP can go bad fast. An IP that was clean in the morning can be compromised by the afternoon due to other users. This cycle of use and abuse makes it harder to find truly clean IPs. When a proxy provider gets a reputation for having a clean pool, more users come in and the IP quality decreases faster.
So when your order gets flagged despite using a supposedly 'clean' proxy, remember that youre not just up against fraud detection systems. Youre also contending with the cumulative impact of every failed carding attempt that preceded yours on that IP.
The Solution
The solution to this IP quality issue is simple: use proxy providers that block financial sites. These providers, that cater to more legitimate use cases, block payment processors and financial institutions. This limitation, while inconvenient, is a goldmine for us.
Why? Because these restrictions create a shield, preventing other carders from tainting the IP pool. If the proxy doesnt allow connections to Stripe, PayPal or Adyen, it means no one has used these IPs for fraudulent transactions on these platforms. The result? IP addresses that remain clean in the eyes of payment providers and fraud detection systems.
This approach gives us a significant advantage. Were no longer playing Russian roulette with IPs that have been abused by every Tom Dick and Harry trying to card their way to a new PlayStation. Instead were working with IPs that have a clean slate when it comes to financial transactions.
But d0ctrine if these proxy providers dont allow access to Stripe, PayPal, Adyen etc how can we use them? Good question. The answer is in some DNS magic.
By using specific DNS tricks we can bypass these restrictions while still benefiting from the clean reputation of these IPs. This method allows us to access the sites we need while maintaining the pristine status of our proxy IPs.
DNS
To understand how we can get around these financial site blocks we need to understand DNS (Domain Name System) and how it interacts with different proxy types.
DNS is the internets phonebook, it translates human readable domain names into IP addresses that computers use. Most proxy providers implement their URL blocks at the DNS level. They’re not blocking financial sites IP addresses directly, but blocking their DNS resolvers from translating certain domain names.
For example when a proxy tries to access api.stripe.com the providers DNS resolver returns a blank instead of Stripes actual IP address. That’s why you can’t access these sites through these ‘clean’ proxies under normal circumstances.
View attachment 5976
Here’s where proxy types come in. With HTTP proxies DNS resolution happens on the proxy server side, making it hard to get around their blocks. But with SOCKS5 proxies we have a golden opportunity.
SOCKS5 proxies operate at a lower network level, we have more flexibility in how traffic is handled. By default you’re using the proxy’s DNS resolver. But - and this is the key - with SOCKS5 we can change that. We can configure our system to use a different DNS resolver, one that doesn’t have these blocks in place.
So we can use these clean, untainted SOCKS5 proxies and still access the financial sites we need. We’re basically bypassing the proxy’s phonebook and using our own.
The Process
Now that we covered the theory let’s get into the nitty gritty of actually implementing this bypass. You’ll need three things:
- An antidetect browser with DNS changing capabilities
- A proxy provider that blocks financial sites
- A reliable external DNS resolver
For antidetect browsers GoLogin and Linken Sphere are good options. Both have DNS configuration options for our method.
For proxy providers look for ones that block financial sites. Oxylabs and IPRoyal are good examples. Their restrictions which are usually a pain in the ass become our advantage in this scenario.
For our external DNS we’ll use Cloudflare’s resolver (1.1.1.1). It’s fast, reliable and most importantly not associated with any proxy services.
Here’s the step-by-step process:
When you hit api.stripe.com, you should see a JSON response that looks like this:
- Set up your antidetect profile:
- Launch your antidetect browser (GoLogin or Linken Sphere)
- Create a new browser profile
- In the network settings find the DNS configuration option
- Enter Cloudflares DNS: 1.1.1.1 and 1.0.0.1 as primary and secondary
- Configure your SOCKS5 proxy:
- Ensure 'Use proxy DNS' is disabled - this is crucial
- In the same profile settings locate the proxy configuration
- Select SOCKS5 as the proxy type
- Enter the details provided by your proxy service (Oxylabs or IPRoyal)
- Test your setup:
- Launch the browser profile
- Visit ipleak.net to confirm youre using the proxy IP
- Try accessing api.stripe.com
* Hidden text: cannot be quoted. *
This response is exactly what we want to see. It means youve successfully connected to Stripes API server despite the proxy provider blocking it. The error message is irrelevant - were not trying to make a valid API call. Whats important is that you received a response from Stripe at all.
If you see this message, congratu-fucking-lations. Youve just bypassed the proxy providers DNS block. Youre now connecting to Stripe through an IP that should, by all accounts, be unable to reach it.
If you dont see this message and instead get a connection error or timeout, somethings off. Double-check your DNS settings and proxy configuration. Make sure 'Use proxy DNS' is disabled and that youre using a SOCKS5 proxy, not HTTP.
From here on out, you potentially have a clean IP address for your carding operations. However, dont get cocky just yet. While this method ensures your IP hasnt been used for financial fraud, it doesnt guarantee overall cleanliness.
Double-check your IP with services like IPQS and Scamalytics. Just because its clean with payment processors doesnt mean its clean across the board. These IPs could still have been used for other shit like botnets or spam campaigns.
Closing Thoughts
We just armed you with a method to access cleaner IPs, but this aint no silver bullet. Its a tool that demands skill and vigilance.
Remember:
- Rotate IPs regularly
- Dont overuse this trick
- Maintain strict OPSEC
Fraud detection evolves constantly. Stay sharp, adapt and never get complacent. Knowledge is power, but application is key.
Use this wisely and may your carding endeavors prosper. Now go make some fucking money.
d0ctrine out.
requiemnpc21
Newbie
- Joined
- 18.02.25
- Messages
- 13
- Reaction score
- 1
- Points
- 3
Tahnks
Welcome to another carding knowledge you didnt know you needed. Today were diving into the dirty world of proxy providers and how to get every last drop of value out of their so called “clean” IPs.
You see most of you noobs think youve hit the jackpot when you find a residential proxy provider that hasnt been used to death by every script kiddie with a stolen credit card. But heres the truth: even the cleanest pools get dirtier and unusable after awhile.
The secret? Its not about finding virgin IPs. Its about understanding how these proxy providers work and exploiting their weaknesses. Were talking DNS manipulation sneaky little tricks that let you get past their blocks and restrictions.
This isnt some ‘5 Easy Steps to Card Amazon crap. Were going deep into the technical weeds exploring how to bypass URL blocks on financial sites like Stripe and PayPal. By the end of this guide youll be seeing residential proxies in a whole new light.
So put on your thinking cap and leave your preconceptions at the door. Its time to learn how to turn those ‘clean IPs into your personal playground. This is advanced stuff but if youve got more than two brain cells to rub together youll manage. Lets fucking go!
How IPs Get Dirty
So why are your clean proxies failing? We need to look at how proxy providers manage their IP pools. They have huge lists of IP addresses they sell to their customers as proxies.
When a provider gets a new batch of IPs, they are clean and unused. But that doesnt last long. As soon as those IPs become available, they get used by various customers, including carders doing fraudulent transactions.
The problem is the sheer number of users all hitting the same websites with fraudulent activity. Each failed attempt, chargeback or suspicious transaction on an IP address leaves a mark. Those marks add up fast and degrade the IP.
The IP you just connected to has likely been used by numerous other carders before you. They may have attempted to card various e-commerce sites or used payment processors like Stripe for shady transactions. All of these activities leave digital footprints that raise flags in security systems.
This is why you can run an IP through IPQS or Scamalytics, get a clean result and still have your orders declined. Those surface level checks dont show the full history of suspicious activity on that IP across different platforms.
An IP can go bad fast. An IP that was clean in the morning can be compromised by the afternoon due to other users. This cycle of use and abuse makes it harder to find truly clean IPs. When a proxy provider gets a reputation for having a clean pool, more users come in and the IP quality decreases faster.
So when your order gets flagged despite using a supposedly 'clean' proxy, remember that youre not just up against fraud detection systems. Youre also contending with the cumulative impact of every failed carding attempt that preceded yours on that IP.
The Solution
The solution to this IP quality issue is simple: use proxy providers that block financial sites. These providers, that cater to more legitimate use cases, block payment processors and financial institutions. This limitation, while inconvenient, is a goldmine for us.
Why? Because these restrictions create a shield, preventing other carders from tainting the IP pool. If the proxy doesnt allow connections to Stripe, PayPal or Adyen, it means no one has used these IPs for fraudulent transactions on these platforms. The result? IP addresses that remain clean in the eyes of payment providers and fraud detection systems.
This approach gives us a significant advantage. Were no longer playing Russian roulette with IPs that have been abused by every Tom Dick and Harry trying to card their way to a new PlayStation. Instead were working with IPs that have a clean slate when it comes to financial transactions.
But d0ctrine if these proxy providers dont allow access to Stripe, PayPal, Adyen etc how can we use them? Good question. The answer is in some DNS magic.
By using specific DNS tricks we can bypass these restrictions while still benefiting from the clean reputation of these IPs. This method allows us to access the sites we need while maintaining the pristine status of our proxy IPs.
DNS
To understand how we can get around these financial site blocks we need to understand DNS (Domain Name System) and how it interacts with different proxy types.
DNS is the internets phonebook, it translates human readable domain names into IP addresses that computers use. Most proxy providers implement their URL blocks at the DNS level. They’re not blocking financial sites IP addresses directly, but blocking their DNS resolvers from translating certain domain names.
For example when a proxy tries to access api.stripe.com the providers DNS resolver returns a blank instead of Stripes actual IP address. That’s why you can’t access these sites through these ‘clean’ proxies under normal circumstances.
View attachment 5976
Here’s where proxy types come in. With HTTP proxies DNS resolution happens on the proxy server side, making it hard to get around their blocks. But with SOCKS5 proxies we have a golden opportunity.
SOCKS5 proxies operate at a lower network level, we have more flexibility in how traffic is handled. By default you’re using the proxy’s DNS resolver. But - and this is the key - with SOCKS5 we can change that. We can configure our system to use a different DNS resolver, one that doesn’t have these blocks in place.
So we can use these clean, untainted SOCKS5 proxies and still access the financial sites we need. We’re basically bypassing the proxy’s phonebook and using our own.
The Process
Now that we covered the theory let’s get into the nitty gritty of actually implementing this bypass. You’ll need three things:
- An antidetect browser with DNS changing capabilities
- A proxy provider that blocks financial sites
- A reliable external DNS resolver
For antidetect browsers GoLogin and Linken Sphere are good options. Both have DNS configuration options for our method.
For proxy providers look for ones that block financial sites. Oxylabs and IPRoyal are good examples. Their restrictions which are usually a pain in the ass become our advantage in this scenario.
For our external DNS we’ll use Cloudflare’s resolver (1.1.1.1). It’s fast, reliable and most importantly not associated with any proxy services.
Here’s the step-by-step process:
When you hit api.stripe.com, you should see a JSON response that looks like this:
- Set up your antidetect profile:
- Launch your antidetect browser (GoLogin or Linken Sphere)
- Create a new browser profile
- In the network settings find the DNS configuration option
- Enter Cloudflares DNS: 1.1.1.1 and 1.0.0.1 as primary and secondary
- Configure your SOCKS5 proxy:
- Ensure 'Use proxy DNS' is disabled - this is crucial
- In the same profile settings locate the proxy configuration
- Select SOCKS5 as the proxy type
- Enter the details provided by your proxy service (Oxylabs or IPRoyal)
- Test your setup:
- Launch the browser profile
- Visit ipleak.net to confirm youre using the proxy IP
- Try accessing api.stripe.com
* Hidden text: cannot be quoted. *
This response is exactly what we want to see. It means youve successfully connected to Stripes API server despite the proxy provider blocking it. The error message is irrelevant - were not trying to make a valid API call. Whats important is that you received a response from Stripe at all.
If you see this message, congratu-fucking-lations. Youve just bypassed the proxy providers DNS block. Youre now connecting to Stripe through an IP that should, by all accounts, be unable to reach it.
If you dont see this message and instead get a connection error or timeout, somethings off. Double-check your DNS settings and proxy configuration. Make sure 'Use proxy DNS' is disabled and that youre using a SOCKS5 proxy, not HTTP.
From here on out, you potentially have a clean IP address for your carding operations. However, dont get cocky just yet. While this method ensures your IP hasnt been used for financial fraud, it doesnt guarantee overall cleanliness.
Double-check your IP with services like IPQS and Scamalytics. Just because its clean with payment processors doesnt mean its clean across the board. These IPs could still have been used for other shit like botnets or spam campaigns.
Closing Thoughts
We just armed you with a method to access cleaner IPs, but this aint no silver bullet. Its a tool that demands skill and vigilance.
Remember:
- Rotate IPs regularly
- Dont overuse this trick
- Maintain strict OPSEC
Fraud detection evolves constantly. Stay sharp, adapt and never get complacent. Knowledge is power, but application is key.
Use this wisely and may your carding endeavors prosper. Now go make some fucking money.
d0ctrine out.
fire stuff
Welcome to another carding knowledge you didnt know you needed. Today were diving into the dirty world of proxy providers and how to get every last drop of value out of their so called “clean” IPs.
You see most of you noobs think youve hit the jackpot when you find a residential proxy provider that hasnt been used to death by every script kiddie with a stolen credit card. But heres the truth: even the cleanest pools get dirtier and unusable after awhile.
The secret? Its not about finding virgin IPs. Its about understanding how these proxy providers work and exploiting their weaknesses. Were talking DNS manipulation sneaky little tricks that let you get past their blocks and restrictions.
This isnt some ‘5 Easy Steps to Card Amazon crap. Were going deep into the technical weeds exploring how to bypass URL blocks on financial sites like Stripe and PayPal. By the end of this guide youll be seeing residential proxies in a whole new light.
So put on your thinking cap and leave your preconceptions at the door. Its time to learn how to turn those ‘clean IPs into your personal playground. This is advanced stuff but if youve got more than two brain cells to rub together youll manage. Lets fucking go!
How IPs Get Dirty
So why are your clean proxies failing? We need to look at how proxy providers manage their IP pools. They have huge lists of IP addresses they sell to their customers as proxies.
When a provider gets a new batch of IPs, they are clean and unused. But that doesnt last long. As soon as those IPs become available, they get used by various customers, including carders doing fraudulent transactions.
The problem is the sheer number of users all hitting the same websites with fraudulent activity. Each failed attempt, chargeback or suspicious transaction on an IP address leaves a mark. Those marks add up fast and degrade the IP.
The IP you just connected to has likely been used by numerous other carders before you. They may have attempted to card various e-commerce sites or used payment processors like Stripe for shady transactions. All of these activities leave digital footprints that raise flags in security systems.
This is why you can run an IP through IPQS or Scamalytics, get a clean result and still have your orders declined. Those surface level checks dont show the full history of suspicious activity on that IP across different platforms.
An IP can go bad fast. An IP that was clean in the morning can be compromised by the afternoon due to other users. This cycle of use and abuse makes it harder to find truly clean IPs. When a proxy provider gets a reputation for having a clean pool, more users come in and the IP quality decreases faster.
So when your order gets flagged despite using a supposedly 'clean' proxy, remember that youre not just up against fraud detection systems. Youre also contending with the cumulative impact of every failed carding attempt that preceded yours on that IP.
The Solution
The solution to this IP quality issue is simple: use proxy providers that block financial sites. These providers, that cater to more legitimate use cases, block payment processors and financial institutions. This limitation, while inconvenient, is a goldmine for us.
Why? Because these restrictions create a shield, preventing other carders from tainting the IP pool. If the proxy doesnt allow connections to Stripe, PayPal or Adyen, it means no one has used these IPs for fraudulent transactions on these platforms. The result? IP addresses that remain clean in the eyes of payment providers and fraud detection systems.
This approach gives us a significant advantage. Were no longer playing Russian roulette with IPs that have been abused by every Tom Dick and Harry trying to card their way to a new PlayStation. Instead were working with IPs that have a clean slate when it comes to financial transactions.
But d0ctrine if these proxy providers dont allow access to Stripe, PayPal, Adyen etc how can we use them? Good question. The answer is in some DNS magic.
By using specific DNS tricks we can bypass these restrictions while still benefiting from the clean reputation of these IPs. This method allows us to access the sites we need while maintaining the pristine status of our proxy IPs.
DNS
To understand how we can get around these financial site blocks we need to understand DNS (Domain Name System) and how it interacts with different proxy types.
DNS is the internets phonebook, it translates human readable domain names into IP addresses that computers use. Most proxy providers implement their URL blocks at the DNS level. They’re not blocking financial sites IP addresses directly, but blocking their DNS resolvers from translating certain domain names.
For example when a proxy tries to access api.stripe.com the providers DNS resolver returns a blank instead of Stripes actual IP address. That’s why you can’t access these sites through these ‘clean’ proxies under normal circumstances.
View attachment 5976
Here’s where proxy types come in. With HTTP proxies DNS resolution happens on the proxy server side, making it hard to get around their blocks. But with SOCKS5 proxies we have a golden opportunity.
SOCKS5 proxies operate at a lower network level, we have more flexibility in how traffic is handled. By default you’re using the proxy’s DNS resolver. But - and this is the key - with SOCKS5 we can change that. We can configure our system to use a different DNS resolver, one that doesn’t have these blocks in place.
So we can use these clean, untainted SOCKS5 proxies and still access the financial sites we need. We’re basically bypassing the proxy’s phonebook and using our own.
The Process
Now that we covered the theory let’s get into the nitty gritty of actually implementing this bypass. You’ll need three things:
- An antidetect browser with DNS changing capabilities
- A proxy provider that blocks financial sites
- A reliable external DNS resolver
For antidetect browsers GoLogin and Linken Sphere are good options. Both have DNS configuration options for our method.
For proxy providers look for ones that block financial sites. Oxylabs and IPRoyal are good examples. Their restrictions which are usually a pain in the ass become our advantage in this scenario.
For our external DNS we’ll use Cloudflare’s resolver (1.1.1.1). It’s fast, reliable and most importantly not associated with any proxy services.
Here’s the step-by-step process:
When you hit api.stripe.com, you should see a JSON response that looks like this:
- Set up your antidetect profile:
- Launch your antidetect browser (GoLogin or Linken Sphere)
- Create a new browser profile
- In the network settings find the DNS configuration option
- Enter Cloudflares DNS: 1.1.1.1 and 1.0.0.1 as primary and secondary
- Configure your SOCKS5 proxy:
- Ensure 'Use proxy DNS' is disabled - this is crucial
- In the same profile settings locate the proxy configuration
- Select SOCKS5 as the proxy type
- Enter the details provided by your proxy service (Oxylabs or IPRoyal)
- Test your setup:
- Launch the browser profile
- Visit ipleak.net to confirm youre using the proxy IP
- Try accessing api.stripe.com
* Hidden text: cannot be quoted. *
This response is exactly what we want to see. It means youve successfully connected to Stripes API server despite the proxy provider blocking it. The error message is irrelevant - were not trying to make a valid API call. Whats important is that you received a response from Stripe at all.
If you see this message, congratu-fucking-lations. Youve just bypassed the proxy providers DNS block. Youre now connecting to Stripe through an IP that should, by all accounts, be unable to reach it.
If you dont see this message and instead get a connection error or timeout, somethings off. Double-check your DNS settings and proxy configuration. Make sure 'Use proxy DNS' is disabled and that youre using a SOCKS5 proxy, not HTTP.
From here on out, you potentially have a clean IP address for your carding operations. However, dont get cocky just yet. While this method ensures your IP hasnt been used for financial fraud, it doesnt guarantee overall cleanliness.
Double-check your IP with services like IPQS and Scamalytics. Just because its clean with payment processors doesnt mean its clean across the board. These IPs could still have been used for other shit like botnets or spam campaigns.
Closing Thoughts
We just armed you with a method to access cleaner IPs, but this aint no silver bullet. Its a tool that demands skill and vigilance.
Remember:
- Rotate IPs regularly
- Dont overuse this trick
- Maintain strict OPSEC
Fraud detection evolves constantly. Stay sharp, adapt and never get complacent. Knowledge is power, but application is key.
Use this wisely and may your carding endeavors prosper. Now go make some fucking money.
d0ctrine out.
666666666666
Welcome to another carding knowledge you didnt know you needed. Today were diving into the dirty world of proxy providers and how to get every last drop of value out of their so called “clean” IPs.
You see most of you noobs think youve hit the jackpot when you find a residential proxy provider that hasnt been used to death by every script kiddie with a stolen credit card. But heres the truth: even the cleanest pools get dirtier and unusable after awhile.
The secret? Its not about finding virgin IPs. Its about understanding how these proxy providers work and exploiting their weaknesses. Were talking DNS manipulation sneaky little tricks that let you get past their blocks and restrictions.
This isnt some ‘5 Easy Steps to Card Amazon crap. Were going deep into the technical weeds exploring how to bypass URL blocks on financial sites like Stripe and PayPal. By the end of this guide youll be seeing residential proxies in a whole new light.
So put on your thinking cap and leave your preconceptions at the door. Its time to learn how to turn those ‘clean IPs into your personal playground. This is advanced stuff but if youve got more than two brain cells to rub together youll manage. Lets fucking go!
How IPs Get Dirty
So why are your clean proxies failing? We need to look at how proxy providers manage their IP pools. They have huge lists of IP addresses they sell to their customers as proxies.
When a provider gets a new batch of IPs, they are clean and unused. But that doesnt last long. As soon as those IPs become available, they get used by various customers, including carders doing fraudulent transactions.
The problem is the sheer number of users all hitting the same websites with fraudulent activity. Each failed attempt, chargeback or suspicious transaction on an IP address leaves a mark. Those marks add up fast and degrade the IP.
The IP you just connected to has likely been used by numerous other carders before you. They may have attempted to card various e-commerce sites or used payment processors like Stripe for shady transactions. All of these activities leave digital footprints that raise flags in security systems.
This is why you can run an IP through IPQS or Scamalytics, get a clean result and still have your orders declined. Those surface level checks dont show the full history of suspicious activity on that IP across different platforms.
An IP can go bad fast. An IP that was clean in the morning can be compromised by the afternoon due to other users. This cycle of use and abuse makes it harder to find truly clean IPs. When a proxy provider gets a reputation for having a clean pool, more users come in and the IP quality decreases faster.
So when your order gets flagged despite using a supposedly 'clean' proxy, remember that youre not just up against fraud detection systems. Youre also contending with the cumulative impact of every failed carding attempt that preceded yours on that IP.
The Solution
The solution to this IP quality issue is simple: use proxy providers that block financial sites. These providers, that cater to more legitimate use cases, block payment processors and financial institutions. This limitation, while inconvenient, is a goldmine for us.
Why? Because these restrictions create a shield, preventing other carders from tainting the IP pool. If the proxy doesnt allow connections to Stripe, PayPal or Adyen, it means no one has used these IPs for fraudulent transactions on these platforms. The result? IP addresses that remain clean in the eyes of payment providers and fraud detection systems.
This approach gives us a significant advantage. Were no longer playing Russian roulette with IPs that have been abused by every Tom Dick and Harry trying to card their way to a new PlayStation. Instead were working with IPs that have a clean slate when it comes to financial transactions.
But d0ctrine if these proxy providers dont allow access to Stripe, PayPal, Adyen etc how can we use them? Good question. The answer is in some DNS magic.
By using specific DNS tricks we can bypass these restrictions while still benefiting from the clean reputation of these IPs. This method allows us to access the sites we need while maintaining the pristine status of our proxy IPs.
DNS
To understand how we can get around these financial site blocks we need to understand DNS (Domain Name System) and how it interacts with different proxy types.
DNS is the internets phonebook, it translates human readable domain names into IP addresses that computers use. Most proxy providers implement their URL blocks at the DNS level. They’re not blocking financial sites IP addresses directly, but blocking their DNS resolvers from translating certain domain names.
For example when a proxy tries to access api.stripe.com the providers DNS resolver returns a blank instead of Stripes actual IP address. That’s why you can’t access these sites through these ‘clean’ proxies under normal circumstances.
View attachment 5976
Here’s where proxy types come in. With HTTP proxies DNS resolution happens on the proxy server side, making it hard to get around their blocks. But with SOCKS5 proxies we have a golden opportunity.
SOCKS5 proxies operate at a lower network level, we have more flexibility in how traffic is handled. By default you’re using the proxy’s DNS resolver. But - and this is the key - with SOCKS5 we can change that. We can configure our system to use a different DNS resolver, one that doesn’t have these blocks in place.
So we can use these clean, untainted SOCKS5 proxies and still access the financial sites we need. We’re basically bypassing the proxy’s phonebook and using our own.
The Process
Now that we covered the theory let’s get into the nitty gritty of actually implementing this bypass. You’ll need three things:
- An antidetect browser with DNS changing capabilities
- A proxy provider that blocks financial sites
- A reliable external DNS resolver
For antidetect browsers GoLogin and Linken Sphere are good options. Both have DNS configuration options for our method.
For proxy providers look for ones that block financial sites. Oxylabs and IPRoyal are good examples. Their restrictions which are usually a pain in the ass become our advantage in this scenario.
For our external DNS we’ll use Cloudflare’s resolver (1.1.1.1). It’s fast, reliable and most importantly not associated with any proxy services.
Here’s the step-by-step process:
当你点击api.stripe.com时，你应该看到如下JSON 响应：
- Set up your antidetect profile:
- Launch your antidetect browser (GoLogin or Linken Sphere)
- Create a new browser profile
- In the network settings find the DNS configuration option
- Enter Cloudflares DNS: 1.1.1.1 and 1.0.0.1 as primary and secondary
- Configure your SOCKS5 proxy:
- Ensure 'Use proxy DNS' is disabled - this is crucial
- In the same profile settings locate the proxy configuration
- Select SOCKS5 as the proxy type
- Enter the details provided by your proxy service (Oxylabs or IPRoyal)
- 测试您的设置：
- 启动浏览器配置文件
- 访问ipleak.net以确认您正在使用代理 IP
- 尝试访问api.stripe.com
* 隐藏文字：无法引用。*
这个响应正是我们想要看到的。这意味着尽管代理提供商阻止了它，但您仍成功连接到Stripes API 服务器。错误消息无关紧要 - 我们并没有尝试进行有效的 API 调用。重要的是您收到了来自Stripe的响应。
如果您看到此消息，恭喜您。您刚刚绕过了代理提供商的DNS 阻止。您现在正在通过一个按理说应该无法访问的 IP连接到Stripe 。
如果您没有看到此消息，而是收到连接错误或超时，则表明有些问题。请仔细检查您的DNS 设置和代理配置。确保“使用代理 DNS”已禁用，并且您使用的是SOCKS5 代理，而不是HTTP。
从现在起，你可能有一个干净的 IP 地址用于你的信用卡欺诈操作。不过，现在还不要太过自大。虽然这种方法可以确保你的 IP 不会被用于金融欺诈，但它并不能保证整体的干净性。
使用IPQS和Scamalytics等服务仔细检查您的 IP 。支付处理器上没有 IP并不意味着它完全没有 IP。这些 IP 可能仍被用于其他用途，例如僵尸网络或垃圾邮件活动。
结束语
我们只是向您介绍了一种访问更干净 IP 的方法，但这并非万灵药。这是一种需要技巧和警惕性的工具。
记住：
- 定期轮换 IP
- 不要过度使用这个技巧
- 保持严格的 OPSEC
欺诈检测不断发展。保持敏锐，不断适应，永不自满。知识就是力量，但应用才是关键。
明智地使用它，祝你的信用卡事业兴旺发达。现在去赚点钱吧。
教义出来了。
thanks
Welcome to another carding knowledge you didnt know you needed. Today were diving into the dirty world of proxy providers and how to get every last drop of value out of their so called “clean” IPs.
You see most of you noobs think youve hit the jackpot when you find a residential proxy provider that hasnt been used to death by every script kiddie with a stolen credit card. But heres the truth: even the cleanest pools get dirtier and unusable after awhile.
The secret? Its not about finding virgin IPs. Its about understanding how these proxy providers work and exploiting their weaknesses. Were talking DNS manipulation sneaky little tricks that let you get past their blocks and restrictions.
This isnt some ‘5 Easy Steps to Card Amazon crap. Were going deep into the technical weeds exploring how to bypass URL blocks on financial sites like Stripe and PayPal. By the end of this guide youll be seeing residential proxies in a whole new light.
So put on your thinking cap and leave your preconceptions at the door. Its time to learn how to turn those ‘clean IPs into your personal playground. This is advanced stuff but if youve got more than two brain cells to rub together youll manage. Lets fucking go!
How IPs Get Dirty
So why are your clean proxies failing? We need to look at how proxy providers manage their IP pools. They have huge lists of IP addresses they sell to their customers as proxies.
When a provider gets a new batch of IPs, they are clean and unused. But that doesnt last long. As soon as those IPs become available, they get used by various customers, including carders doing fraudulent transactions.
The problem is the sheer number of users all hitting the same websites with fraudulent activity. Each failed attempt, chargeback or suspicious transaction on an IP address leaves a mark. Those marks add up fast and degrade the IP.
The IP you just connected to has likely been used by numerous other carders before you. They may have attempted to card various e-commerce sites or used payment processors like Stripe for shady transactions. All of these activities leave digital footprints that raise flags in security systems.
This is why you can run an IP through IPQS or Scamalytics, get a clean result and still have your orders declined. Those surface level checks dont show the full history of suspicious activity on that IP across different platforms.
An IP can go bad fast. An IP that was clean in the morning can be compromised by the afternoon due to other users. This cycle of use and abuse makes it harder to find truly clean IPs. When a proxy provider gets a reputation for having a clean pool, more users come in and the IP quality decreases faster.
So when your order gets flagged despite using a supposedly 'clean' proxy, remember that youre not just up against fraud detection systems. Youre also contending with the cumulative impact of every failed carding attempt that preceded yours on that IP.
The Solution
The solution to this IP quality issue is simple: use proxy providers that block financial sites. These providers, that cater to more legitimate use cases, block payment processors and financial institutions. This limitation, while inconvenient, is a goldmine for us.
Why? Because these restrictions create a shield, preventing other carders from tainting the IP pool. If the proxy doesnt allow connections to Stripe, PayPal or Adyen, it means no one has used these IPs for fraudulent transactions on these platforms. The result? IP addresses that remain clean in the eyes of payment providers and fraud detection systems.
This approach gives us a significant advantage. Were no longer playing Russian roulette with IPs that have been abused by every Tom Dick and Harry trying to card their way to a new PlayStation. Instead were working with IPs that have a clean slate when it comes to financial transactions.
But d0ctrine if these proxy providers dont allow access to Stripe, PayPal, Adyen etc how can we use them? Good question. The answer is in some DNS magic.
By using specific DNS tricks we can bypass these restrictions while still benefiting from the clean reputation of these IPs. This method allows us to access the sites we need while maintaining the pristine status of our proxy IPs.
DNS
To understand how we can get around these financial site blocks we need to understand DNS (Domain Name System) and how it interacts with different proxy types.
DNS is the internets phonebook, it translates human readable domain names into IP addresses that computers use. Most proxy providers implement their URL blocks at the DNS level. They’re not blocking financial sites IP addresses directly, but blocking their DNS resolvers from translating certain domain names.
For example when a proxy tries to access api.stripe.com the providers DNS resolver returns a blank instead of Stripes actual IP address. That’s why you can’t access these sites through these ‘clean’ proxies under normal circumstances.
View attachment 5976
Here’s where proxy types come in. With HTTP proxies DNS resolution happens on the proxy server side, making it hard to get around their blocks. But with SOCKS5 proxies we have a golden opportunity.
SOCKS5 proxies operate at a lower network level, we have more flexibility in how traffic is handled. By default you’re using the proxy’s DNS resolver. But - and this is the key - with SOCKS5 we can change that. We can configure our system to use a different DNS resolver, one that doesn’t have these blocks in place.
So we can use these clean, untainted SOCKS5 proxies and still access the financial sites we need. We’re basically bypassing the proxy’s phonebook and using our own.
The Process
Now that we covered the theory let’s get into the nitty gritty of actually implementing this bypass. You’ll need three things:
- An antidetect browser with DNS changing capabilities
- A proxy provider that blocks financial sites
- A reliable external DNS resolver
For antidetect browsers GoLogin and Linken Sphere are good options. Both have DNS configuration options for our method.
For proxy providers look for ones that block financial sites. Oxylabs and IPRoyal are good examples. Their restrictions which are usually a pain in the ass become our advantage in this scenario.
For our external DNS we’ll use Cloudflare’s resolver (1.1.1.1). It’s fast, reliable and most importantly not associated with any proxy services.
Here’s the step-by-step process:
When you hit api.stripe.com, you should see a JSON response that looks like this:
- Set up your antidetect profile:
- Launch your antidetect browser (GoLogin or Linken Sphere)
- Create a new browser profile
- In the network settings find the DNS configuration option
- Enter Cloudflares DNS: 1.1.1.1 and 1.0.0.1 as primary and secondary
- Configure your SOCKS5 proxy:
- Ensure 'Use proxy DNS' is disabled - this is crucial
- In the same profile settings locate the proxy configuration
- Select SOCKS5 as the proxy type
- Enter the details provided by your proxy service (Oxylabs or IPRoyal)
- Test your setup:
- Launch the browser profile
- Visit ipleak.net to confirm youre using the proxy IP
- Try accessing api.stripe.com
* Hidden text: cannot be quoted. *
This response is exactly what we want to see. It means youve successfully connected to Stripes API server despite the proxy provider blocking it. The error message is irrelevant - were not trying to make a valid API call. Whats important is that you received a response from Stripe at all.
If you see this message, congratu-fucking-lations. Youve just bypassed the proxy providers DNS block. Youre now connecting to Stripe through an IP that should, by all accounts, be unable to reach it.
If you dont see this message and instead get a connection error or timeout, somethings off. Double-check your DNS settings and proxy configuration. Make sure 'Use proxy DNS' is disabled and that youre using a SOCKS5 proxy, not HTTP.
From here on out, you potentially have a clean IP address for your carding operations. However, dont get cocky just yet. While this method ensures your IP hasnt been used for financial fraud, it doesnt guarantee overall cleanliness.
Double-check your IP with services like IPQS and Scamalytics. Just because its clean with payment processors doesnt mean its clean across the board. These IPs could still have been used for other shit like botnets or spam campaigns.
Closing Thoughts
We just armed you with a method to access cleaner IPs, but this aint no silver bullet. Its a tool that demands skill and vigilance.
Remember:
- Rotate IPs regularly
- Dont overuse this trick
- Maintain strict OPSEC
Fraud detection evolves constantly. Stay sharp, adapt and never get complacent. Knowledge is power, but application is key.
Use this wisely and may your carding endeavors prosper. Now go make some fucking money.
d0ctrine out.
moneyisblind
Newbie
- Joined
- 14.09.24
- Messages
- 8
- Reaction score
- 5
- Points
- 3
Nice
Welcome to another carding knowledge you didnt know you needed. Today were diving into the dirty world of proxy providers and how to get every last drop of value out of their so called “clean” IPs.
You see most of you noobs think youve hit the jackpot when you find a residential proxy provider that hasnt been used to death by every script kiddie with a stolen credit card. But heres the truth: even the cleanest pools get dirtier and unusable after awhile.
The secret? Its not about finding virgin IPs. Its about understanding how these proxy providers work and exploiting their weaknesses. Were talking DNS manipulation sneaky little tricks that let you get past their blocks and restrictions.
This isnt some ‘5 Easy Steps to Card Amazon crap. Were going deep into the technical weeds exploring how to bypass URL blocks on financial sites like Stripe and PayPal. By the end of this guide youll be seeing residential proxies in a whole new light.
So put on your thinking cap and leave your preconceptions at the door. Its time to learn how to turn those ‘clean IPs into your personal playground. This is advanced stuff but if youve got more than two brain cells to rub together youll manage. Lets fucking go!
How IPs Get Dirty
So why are your clean proxies failing? We need to look at how proxy providers manage their IP pools. They have huge lists of IP addresses they sell to their customers as proxies.
When a provider gets a new batch of IPs, they are clean and unused. But that doesnt last long. As soon as those IPs become available, they get used by various customers, including carders doing fraudulent transactions.
The problem is the sheer number of users all hitting the same websites with fraudulent activity. Each failed attempt, chargeback or suspicious transaction on an IP address leaves a mark. Those marks add up fast and degrade the IP.
The IP you just connected to has likely been used by numerous other carders before you. They may have attempted to card various e-commerce sites or used payment processors like Stripe for shady transactions. All of these activities leave digital footprints that raise flags in security systems.
This is why you can run an IP through IPQS or Scamalytics, get a clean result and still have your orders declined. Those surface level checks dont show the full history of suspicious activity on that IP across different platforms.
An IP can go bad fast. An IP that was clean in the morning can be compromised by the afternoon due to other users. This cycle of use and abuse makes it harder to find truly clean IPs. When a proxy provider gets a reputation for having a clean pool, more users come in and the IP quality decreases faster.
So when your order gets flagged despite using a supposedly 'clean' proxy, remember that youre not just up against fraud detection systems. Youre also contending with the cumulative impact of every failed carding attempt that preceded yours on that IP.
The Solution
The solution to this IP quality issue is simple: use proxy providers that block financial sites. These providers, that cater to more legitimate use cases, block payment processors and financial institutions. This limitation, while inconvenient, is a goldmine for us.
Why? Because these restrictions create a shield, preventing other carders from tainting the IP pool. If the proxy doesnt allow connections to Stripe, PayPal or Adyen, it means no one has used these IPs for fraudulent transactions on these platforms. The result? IP addresses that remain clean in the eyes of payment providers and fraud detection systems.
This approach gives us a significant advantage. Were no longer playing Russian roulette with IPs that have been abused by every Tom Dick and Harry trying to card their way to a new PlayStation. Instead were working with IPs that have a clean slate when it comes to financial transactions.
But d0ctrine if these proxy providers dont allow access to Stripe, PayPal, Adyen etc how can we use them? Good question. The answer is in some DNS magic.
By using specific DNS tricks we can bypass these restrictions while still benefiting from the clean reputation of these IPs. This method allows us to access the sites we need while maintaining the pristine status of our proxy IPs.
DNS
To understand how we can get around these financial site blocks we need to understand DNS (Domain Name System) and how it interacts with different proxy types.
DNS is the internets phonebook, it translates human readable domain names into IP addresses that computers use. Most proxy providers implement their URL blocks at the DNS level. They’re not blocking financial sites IP addresses directly, but blocking their DNS resolvers from translating certain domain names.
For example when a proxy tries to access api.stripe.com the providers DNS resolver returns a blank instead of Stripes actual IP address. That’s why you can’t access these sites through these ‘clean’ proxies under normal circumstances.
View attachment 5976
Here’s where proxy types come in. With HTTP proxies DNS resolution happens on the proxy server side, making it hard to get around their blocks. But with SOCKS5 proxies we have a golden opportunity.
SOCKS5 proxies operate at a lower network level, we have more flexibility in how traffic is handled. By default you’re using the proxy’s DNS resolver. But - and this is the key - with SOCKS5 we can change that. We can configure our system to use a different DNS resolver, one that doesn’t have these blocks in place.
So we can use these clean, untainted SOCKS5 proxies and still access the financial sites we need. We’re basically bypassing the proxy’s phonebook and using our own.
The Process
Now that we covered the theory let’s get into the nitty gritty of actually implementing this bypass. You’ll need three things:
- An antidetect browser with DNS changing capabilities
- A proxy provider that blocks financial sites
- A reliable external DNS resolver
For antidetect browsers GoLogin and Linken Sphere are good options. Both have DNS configuration options for our method.
For proxy providers look for ones that block financial sites. Oxylabs and IPRoyal are good examples. Their restrictions which are usually a pain in the ass become our advantage in this scenario.
For our external DNS we’ll use Cloudflare’s resolver (1.1.1.1). It’s fast, reliable and most importantly not associated with any proxy services.
Here’s the step-by-step process:
When you hit api.stripe.com, you should see a JSON response that looks like this:
- Set up your antidetect profile:
- Launch your antidetect browser (GoLogin or Linken Sphere)
- Create a new browser profile
- In the network settings find the DNS configuration option
- Enter Cloudflares DNS: 1.1.1.1 and 1.0.0.1 as primary and secondary
- Configure your SOCKS5 proxy:
- Ensure 'Use proxy DNS' is disabled - this is crucial
- In the same profile settings locate the proxy configuration
- Select SOCKS5 as the proxy type
- Enter the details provided by your proxy service (Oxylabs or IPRoyal)
- Test your setup:
- Launch the browser profile
- Visit ipleak.net to confirm youre using the proxy IP
- Try accessing api.stripe.com
* Hidden text: cannot be quoted. *
This response is exactly what we want to see. It means youve successfully connected to Stripes API server despite the proxy provider blocking it. The error message is irrelevant - were not trying to make a valid API call. Whats important is that you received a response from Stripe at all.
If you see this message, congratu-fucking-lations. Youve just bypassed the proxy providers DNS block. Youre now connecting to Stripe through an IP that should, by all accounts, be unable to reach it.
If you dont see this message and instead get a connection error or timeout, somethings off. Double-check your DNS settings and proxy configuration. Make sure 'Use proxy DNS' is disabled and that youre using a SOCKS5 proxy, not HTTP.
From here on out, you potentially have a clean IP address for your carding operations. However, dont get cocky just yet. While this method ensures your IP hasnt been used for financial fraud, it doesnt guarantee overall cleanliness.
Double-check your IP with services like IPQS and Scamalytics. Just because its clean with payment processors doesnt mean its clean across the board. These IPs could still have been used for other shit like botnets or spam campaigns.
Closing Thoughts
We just armed you with a method to access cleaner IPs, but this aint no silver bullet. Its a tool that demands skill and vigilance.
Remember:
- Rotate IPs regularly
- Dont overuse this trick
- Maintain strict OPSEC
Fraud detection evolves constantly. Stay sharp, adapt and never get complacent. Knowledge is power, but application is key.
Use this wisely and may your carding endeavors prosper. Now go make some fucking money.
d0ctrine out.
you are great bro so great...
Welcome to another carding knowledge you didnt know you needed. Today were diving into the dirty world of proxy providers and how to get every last drop of value out of their so called “clean” IPs.
You see most of you noobs think youve hit the jackpot when you find a residential proxy provider that hasnt been used to death by every script kiddie with a stolen credit card. But heres the truth: even the cleanest pools get dirtier and unusable after awhile.
The secret? Its not about finding virgin IPs. Its about understanding how these proxy providers work and exploiting their weaknesses. Were talking DNS manipulation sneaky little tricks that let you get past their blocks and restrictions.
This isnt some ‘5 Easy Steps to Card Amazon crap. Were going deep into the technical weeds exploring how to bypass URL blocks on financial sites like Stripe and PayPal. By the end of this guide youll be seeing residential proxies in a whole new light.
So put on your thinking cap and leave your preconceptions at the door. Its time to learn how to turn those ‘clean IPs into your personal playground. This is advanced stuff but if youve got more than two brain cells to rub together youll manage. Lets fucking go!
How IPs Get Dirty
So why are your clean proxies failing? We need to look at how proxy providers manage their IP pools. They have huge lists of IP addresses they sell to their customers as proxies.
When a provider gets a new batch of IPs, they are clean and unused. But that doesnt last long. As soon as those IPs become available, they get used by various customers, including carders doing fraudulent transactions.
The problem is the sheer number of users all hitting the same websites with fraudulent activity. Each failed attempt, chargeback or suspicious transaction on an IP address leaves a mark. Those marks add up fast and degrade the IP.
The IP you just connected to has likely been used by numerous other carders before you. They may have attempted to card various e-commerce sites or used payment processors like Stripe for shady transactions. All of these activities leave digital footprints that raise flags in security systems.
This is why you can run an IP through IPQS or Scamalytics, get a clean result and still have your orders declined. Those surface level checks dont show the full history of suspicious activity on that IP across different platforms.
An IP can go bad fast. An IP that was clean in the morning can be compromised by the afternoon due to other users. This cycle of use and abuse makes it harder to find truly clean IPs. When a proxy provider gets a reputation for having a clean pool, more users come in and the IP quality decreases faster.
So when your order gets flagged despite using a supposedly 'clean' proxy, remember that youre not just up against fraud detection systems. Youre also contending with the cumulative impact of every failed carding attempt that preceded yours on that IP.
The Solution
The solution to this IP quality issue is simple: use proxy providers that block financial sites. These providers, that cater to more legitimate use cases, block payment processors and financial institutions. This limitation, while inconvenient, is a goldmine for us.
Why? Because these restrictions create a shield, preventing other carders from tainting the IP pool. If the proxy doesnt allow connections to Stripe, PayPal or Adyen, it means no one has used these IPs for fraudulent transactions on these platforms. The result? IP addresses that remain clean in the eyes of payment providers and fraud detection systems.
This approach gives us a significant advantage. Were no longer playing Russian roulette with IPs that have been abused by every Tom Dick and Harry trying to card their way to a new PlayStation. Instead were working with IPs that have a clean slate when it comes to financial transactions.
But d0ctrine if these proxy providers dont allow access to Stripe, PayPal, Adyen etc how can we use them? Good question. The answer is in some DNS magic.
By using specific DNS tricks we can bypass these restrictions while still benefiting from the clean reputation of these IPs. This method allows us to access the sites we need while maintaining the pristine status of our proxy IPs.
DNS
To understand how we can get around these financial site blocks we need to understand DNS (Domain Name System) and how it interacts with different proxy types.
DNS is the internets phonebook, it translates human readable domain names into IP addresses that computers use. Most proxy providers implement their URL blocks at the DNS level. They’re not blocking financial sites IP addresses directly, but blocking their DNS resolvers from translating certain domain names.
For example when a proxy tries to access api.stripe.com the providers DNS resolver returns a blank instead of Stripes actual IP address. That’s why you can’t access these sites through these ‘clean’ proxies under normal circumstances.
View attachment 5976
Here’s where proxy types come in. With HTTP proxies DNS resolution happens on the proxy server side, making it hard to get around their blocks. But with SOCKS5 proxies we have a golden opportunity.
SOCKS5 proxies operate at a lower network level, we have more flexibility in how traffic is handled. By default you’re using the proxy’s DNS resolver. But - and this is the key - with SOCKS5 we can change that. We can configure our system to use a different DNS resolver, one that doesn’t have these blocks in place.
So we can use these clean, untainted SOCKS5 proxies and still access the financial sites we need. We’re basically bypassing the proxy’s phonebook and using our own.
The Process
Now that we covered the theory let’s get into the nitty gritty of actually implementing this bypass. You’ll need three things:
- An antidetect browser with DNS changing capabilities
- A proxy provider that blocks financial sites
- A reliable external DNS resolver
For antidetect browsers GoLogin and Linken Sphere are good options. Both have DNS configuration options for our method.
For proxy providers look for ones that block financial sites. Oxylabs and IPRoyal are good examples. Their restrictions which are usually a pain in the ass become our advantage in this scenario.
For our external DNS we’ll use Cloudflare’s resolver (1.1.1.1). It’s fast, reliable and most importantly not associated with any proxy services.
Here’s the step-by-step process:
When you hit api.stripe.com, you should see a JSON response that looks like this:
- Set up your antidetect profile:
- Launch your antidetect browser (GoLogin or Linken Sphere)
- Create a new browser profile
- In the network settings find the DNS configuration option
- Enter Cloudflares DNS: 1.1.1.1 and 1.0.0.1 as primary and secondary
- Configure your SOCKS5 proxy:
- Ensure 'Use proxy DNS' is disabled - this is crucial
- In the same profile settings locate the proxy configuration
- Select SOCKS5 as the proxy type
- Enter the details provided by your proxy service (Oxylabs or IPRoyal)
- Test your setup:
- Launch the browser profile
- Visit ipleak.net to confirm youre using the proxy IP
- Try accessing api.stripe.com
* Hidden text: cannot be quoted. *
This response is exactly what we want to see. It means youve successfully connected to Stripes API server despite the proxy provider blocking it. The error message is irrelevant - were not trying to make a valid API call. Whats important is that you received a response from Stripe at all.
If you see this message, congratu-fucking-lations. Youve just bypassed the proxy providers DNS block. Youre now connecting to Stripe through an IP that should, by all accounts, be unable to reach it.
If you dont see this message and instead get a connection error or timeout, somethings off. Double-check your DNS settings and proxy configuration. Make sure 'Use proxy DNS' is disabled and that youre using a SOCKS5 proxy, not HTTP.
From here on out, you potentially have a clean IP address for your carding operations. However, dont get cocky just yet. While this method ensures your IP hasnt been used for financial fraud, it doesnt guarantee overall cleanliness.
Double-check your IP with services like IPQS and Scamalytics. Just because its clean with payment processors doesnt mean its clean across the board. These IPs could still have been used for other shit like botnets or spam campaigns.
Closing Thoughts
We just armed you with a method to access cleaner IPs, but this aint no silver bullet. Its a tool that demands skill and vigilance.
Remember:
- Rotate IPs regularly
- Dont overuse this trick
- Maintain strict OPSEC
Fraud detection evolves constantly. Stay sharp, adapt and never get complacent. Knowledge is power, but application is key.
Use this wisely and may your carding endeavors prosper. Now go make some fucking money.
d0ctrine out.
johncamel2001
Newbie
- Joined
- 29.09.24
- Messages
- 5
- Reaction score
- 4
- Points
- 3
Amazing , hope it works
Welcome to another carding knowledge you didnt know you needed. Today were diving into the dirty world of proxy providers and how to get every last drop of value out of their so called “clean” IPs.
You see most of you noobs think youve hit the jackpot when you find a residential proxy provider that hasnt been used to death by every script kiddie with a stolen credit card. But heres the truth: even the cleanest pools get dirtier and unusable after awhile.
The secret? Its not about finding virgin IPs. Its about understanding how these proxy providers work and exploiting their weaknesses. Were talking DNS manipulation sneaky little tricks that let you get past their blocks and restrictions.
This isnt some ‘5 Easy Steps to Card Amazon crap. Were going deep into the technical weeds exploring how to bypass URL blocks on financial sites like Stripe and PayPal. By the end of this guide youll be seeing residential proxies in a whole new light.
So put on your thinking cap and leave your preconceptions at the door. Its time to learn how to turn those ‘clean IPs into your personal playground. This is advanced stuff but if youve got more than two brain cells to rub together youll manage. Lets fucking go!
How IPs Get Dirty
So why are your clean proxies failing? We need to look at how proxy providers manage their IP pools. They have huge lists of IP addresses they sell to their customers as proxies.
When a provider gets a new batch of IPs, they are clean and unused. But that doesnt last long. As soon as those IPs become available, they get used by various customers, including carders doing fraudulent transactions.
The problem is the sheer number of users all hitting the same websites with fraudulent activity. Each failed attempt, chargeback or suspicious transaction on an IP address leaves a mark. Those marks add up fast and degrade the IP.
The IP you just connected to has likely been used by numerous other carders before you. They may have attempted to card various e-commerce sites or used payment processors like Stripe for shady transactions. All of these activities leave digital footprints that raise flags in security systems.
This is why you can run an IP through IPQS or Scamalytics, get a clean result and still have your orders declined. Those surface level checks dont show the full history of suspicious activity on that IP across different platforms.
An IP can go bad fast. An IP that was clean in the morning can be compromised by the afternoon due to other users. This cycle of use and abuse makes it harder to find truly clean IPs. When a proxy provider gets a reputation for having a clean pool, more users come in and the IP quality decreases faster.
So when your order gets flagged despite using a supposedly 'clean' proxy, remember that youre not just up against fraud detection systems. Youre also contending with the cumulative impact of every failed carding attempt that preceded yours on that IP.
The Solution
The solution to this IP quality issue is simple: use proxy providers that block financial sites. These providers, that cater to more legitimate use cases, block payment processors and financial institutions. This limitation, while inconvenient, is a goldmine for us.
Why? Because these restrictions create a shield, preventing other carders from tainting the IP pool. If the proxy doesnt allow connections to Stripe, PayPal or Adyen, it means no one has used these IPs for fraudulent transactions on these platforms. The result? IP addresses that remain clean in the eyes of payment providers and fraud detection systems.
This approach gives us a significant advantage. Were no longer playing Russian roulette with IPs that have been abused by every Tom Dick and Harry trying to card their way to a new PlayStation. Instead were working with IPs that have a clean slate when it comes to financial transactions.
But d0ctrine if these proxy providers dont allow access to Stripe, PayPal, Adyen etc how can we use them? Good question. The answer is in some DNS magic.
By using specific DNS tricks we can bypass these restrictions while still benefiting from the clean reputation of these IPs. This method allows us to access the sites we need while maintaining the pristine status of our proxy IPs.
DNS
To understand how we can get around these financial site blocks we need to understand DNS (Domain Name System) and how it interacts with different proxy types.
DNS is the internets phonebook, it translates human readable domain names into IP addresses that computers use. Most proxy providers implement their URL blocks at the DNS level. They’re not blocking financial sites IP addresses directly, but blocking their DNS resolvers from translating certain domain names.
For example when a proxy tries to access api.stripe.com the providers DNS resolver returns a blank instead of Stripes actual IP address. That’s why you can’t access these sites through these ‘clean’ proxies under normal circumstances.
View attachment 5976
Here’s where proxy types come in. With HTTP proxies DNS resolution happens on the proxy server side, making it hard to get around their blocks. But with SOCKS5 proxies we have a golden opportunity.
SOCKS5 proxies operate at a lower network level, we have more flexibility in how traffic is handled. By default you’re using the proxy’s DNS resolver. But - and this is the key - with SOCKS5 we can change that. We can configure our system to use a different DNS resolver, one that doesn’t have these blocks in place.
So we can use these clean, untainted SOCKS5 proxies and still access the financial sites we need. We’re basically bypassing the proxy’s phonebook and using our own.
The Process
Now that we covered the theory let’s get into the nitty gritty of actually implementing this bypass. You’ll need three things:
- An antidetect browser with DNS changing capabilities
- A proxy provider that blocks financial sites
- A reliable external DNS resolver
For antidetect browsers GoLogin and Linken Sphere are good options. Both have DNS configuration options for our method.
For proxy providers look for ones that block financial sites. Oxylabs and IPRoyal are good examples. Their restrictions which are usually a pain in the ass become our advantage in this scenario.
For our external DNS we’ll use Cloudflare’s resolver (1.1.1.1). It’s fast, reliable and most importantly not associated with any proxy services.
Here’s the step-by-step process:
When you hit api.stripe.com, you should see a JSON response that looks like this:
- Set up your antidetect profile:
- Launch your antidetect browser (GoLogin or Linken Sphere)
- Create a new browser profile
- In the network settings find the DNS configuration option
- Enter Cloudflares DNS: 1.1.1.1 and 1.0.0.1 as primary and secondary
- Configure your SOCKS5 proxy:
- Ensure 'Use proxy DNS' is disabled - this is crucial
- In the same profile settings locate the proxy configuration
- Select SOCKS5 as the proxy type
- Enter the details provided by your proxy service (Oxylabs or IPRoyal)
- Test your setup:
- Launch the browser profile
- Visit ipleak.net to confirm youre using the proxy IP
- Try accessing api.stripe.com
* Hidden text: cannot be quoted. *
This response is exactly what we want to see. It means youve successfully connected to Stripes API server despite the proxy provider blocking it. The error message is irrelevant - were not trying to make a valid API call. Whats important is that you received a response from Stripe at all.
If you see this message, congratu-fucking-lations. Youve just bypassed the proxy providers DNS block. Youre now connecting to Stripe through an IP that should, by all accounts, be unable to reach it.
If you dont see this message and instead get a connection error or timeout, somethings off. Double-check your DNS settings and proxy configuration. Make sure 'Use proxy DNS' is disabled and that youre using a SOCKS5 proxy, not HTTP.
From here on out, you potentially have a clean IP address for your carding operations. However, dont get cocky just yet. While this method ensures your IP hasnt been used for financial fraud, it doesnt guarantee overall cleanliness.
Double-check your IP with services like IPQS and Scamalytics. Just because its clean with payment processors doesnt mean its clean across the board. These IPs could still have been used for other shit like botnets or spam campaigns.
Closing Thoughts
We just armed you with a method to access cleaner IPs, but this aint no silver bullet. Its a tool that demands skill and vigilance.
Remember:
- Rotate IPs regularly
- Dont overuse this trick
- Maintain strict OPSEC
Fraud detection evolves constantly. Stay sharp, adapt and never get complacent. Knowledge is power, but application is key.
Use this wisely and may your carding endeavors prosper. Now go make some fucking money.
d0ctrine out.
I have the same problem as you now. Have you solved it now? bro
stopped wotking.....
Welcome to another carding knowledge you didnt know you needed. Today were diving into the dirty world of proxy providers and how to get every last drop of value out of their so called “clean” IPs.
You see most of you noobs think youve hit the jackpot when you find a residential proxy provider that hasnt been used to death by every script kiddie with a stolen credit card. But heres the truth: even the cleanest pools get dirtier and unusable after awhile.
The secret? Its not about finding virgin IPs. Its about understanding how these proxy providers work and exploiting their weaknesses. Were talking DNS manipulation sneaky little tricks that let you get past their blocks and restrictions.
This isnt some ‘5 Easy Steps to Card Amazon crap. Were going deep into the technical weeds exploring how to bypass URL blocks on financial sites like Stripe and PayPal. By the end of this guide youll be seeing residential proxies in a whole new light.
So put on your thinking cap and leave your preconceptions at the door. Its time to learn how to turn those ‘clean IPs into your personal playground. This is advanced stuff but if youve got more than two brain cells to rub together youll manage. Lets fucking go!
How IPs Get Dirty
So why are your clean proxies failing? We need to look at how proxy providers manage their IP pools. They have huge lists of IP addresses they sell to their customers as proxies.
When a provider gets a new batch of IPs, they are clean and unused. But that doesnt last long. As soon as those IPs become available, they get used by various customers, including carders doing fraudulent transactions.
The problem is the sheer number of users all hitting the same websites with fraudulent activity. Each failed attempt, chargeback or suspicious transaction on an IP address leaves a mark. Those marks add up fast and degrade the IP.
The IP you just connected to has likely been used by numerous other carders before you. They may have attempted to card various e-commerce sites or used payment processors like Stripe for shady transactions. All of these activities leave digital footprints that raise flags in security systems.
This is why you can run an IP through IPQS or Scamalytics, get a clean result and still have your orders declined. Those surface level checks dont show the full history of suspicious activity on that IP across different platforms.
An IP can go bad fast. An IP that was clean in the morning can be compromised by the afternoon due to other users. This cycle of use and abuse makes it harder to find truly clean IPs. When a proxy provider gets a reputation for having a clean pool, more users come in and the IP quality decreases faster.
So when your order gets flagged despite using a supposedly 'clean' proxy, remember that youre not just up against fraud detection systems. Youre also contending with the cumulative impact of every failed carding attempt that preceded yours on that IP.
The Solution
The solution to this IP quality issue is simple: use proxy providers that block financial sites. These providers, that cater to more legitimate use cases, block payment processors and financial institutions. This limitation, while inconvenient, is a goldmine for us.
Why? Because these restrictions create a shield, preventing other carders from tainting the IP pool. If the proxy doesnt allow connections to Stripe, PayPal or Adyen, it means no one has used these IPs for fraudulent transactions on these platforms. The result? IP addresses that remain clean in the eyes of payment providers and fraud detection systems.
This approach gives us a significant advantage. Were no longer playing Russian roulette with IPs that have been abused by every Tom Dick and Harry trying to card their way to a new PlayStation. Instead were working with IPs that have a clean slate when it comes to financial transactions.
But d0ctrine if these proxy providers dont allow access to Stripe, PayPal, Adyen etc how can we use them? Good question. The answer is in some DNS magic.
By using specific DNS tricks we can bypass these restrictions while still benefiting from the clean reputation of these IPs. This method allows us to access the sites we need while maintaining the pristine status of our proxy IPs.
DNS
To understand how we can get around these financial site blocks we need to understand DNS (Domain Name System) and how it interacts with different proxy types.
DNS is the internets phonebook, it translates human readable domain names into IP addresses that computers use. Most proxy providers implement their URL blocks at the DNS level. They’re not blocking financial sites IP addresses directly, but blocking their DNS resolvers from translating certain domain names.
For example when a proxy tries to access api.stripe.com the providers DNS resolver returns a blank instead of Stripes actual IP address. That’s why you can’t access these sites through these ‘clean’ proxies under normal circumstances.
View attachment 5976
Here’s where proxy types come in. With HTTP proxies DNS resolution happens on the proxy server side, making it hard to get around their blocks. But with SOCKS5 proxies we have a golden opportunity.
SOCKS5 proxies operate at a lower network level, we have more flexibility in how traffic is handled. By default you’re using the proxy’s DNS resolver. But - and this is the key - with SOCKS5 we can change that. We can configure our system to use a different DNS resolver, one that doesn’t have these blocks in place.
So we can use these clean, untainted SOCKS5 proxies and still access the financial sites we need. We’re basically bypassing the proxy’s phonebook and using our own.
The Process
Now that we covered the theory let’s get into the nitty gritty of actually implementing this bypass. You’ll need three things:
- An antidetect browser with DNS changing capabilities
- A proxy provider that blocks financial sites
- A reliable external DNS resolver
For antidetect browsers GoLogin and Linken Sphere are good options. Both have DNS configuration options for our method.
For proxy providers look for ones that block financial sites. Oxylabs and IPRoyal are good examples. Their restrictions which are usually a pain in the ass become our advantage in this scenario.
For our external DNS we’ll use Cloudflare’s resolver (1.1.1.1). It’s fast, reliable and most importantly not associated with any proxy services.
Here’s the step-by-step process:
When you hit api.stripe.com, you should see a JSON response that looks like this:
- Set up your antidetect profile:
- Launch your antidetect browser (GoLogin or Linken Sphere)
- Create a new browser profile
- In the network settings find the DNS configuration option
- Enter Cloudflares DNS: 1.1.1.1 and 1.0.0.1 as primary and secondary
- Configure your SOCKS5 proxy:
- Ensure 'Use proxy DNS' is disabled - this is crucial
- In the same profile settings locate the proxy configuration
- Select SOCKS5 as the proxy type
- Enter the details provided by your proxy service (Oxylabs or IPRoyal)
- Test your setup:
- Launch the browser profile
- Visit ipleak.net to confirm youre using the proxy IP
- Try accessing api.stripe.com
* Hidden text: cannot be quoted. *
This response is exactly what we want to see. It means youve successfully connected to Stripes API server despite the proxy provider blocking it. The error message is irrelevant - were not trying to make a valid API call. Whats important is that you received a response from Stripe at all.
If you see this message, congratu-fucking-lations. Youve just bypassed the proxy providers DNS block. Youre now connecting to Stripe through an IP that should, by all accounts, be unable to reach it.
If you dont see this message and instead get a connection error or timeout, somethings off. Double-check your DNS settings and proxy configuration. Make sure 'Use proxy DNS' is disabled and that youre using a SOCKS5 proxy, not HTTP.
From here on out, you potentially have a clean IP address for your carding operations. However, dont get cocky just yet. While this method ensures your IP hasnt been used for financial fraud, it doesnt guarantee overall cleanliness.
Double-check your IP with services like IPQS and Scamalytics. Just because its clean with payment processors doesnt mean its clean across the board. These IPs could still have been used for other shit like botnets or spam campaigns.
Closing Thoughts
We just armed you with a method to access cleaner IPs, but this aint no silver bullet. Its a tool that demands skill and vigilance.
Remember:
- Rotate IPs regularly
- Dont overuse this trick
- Maintain strict OPSEC
Fraud detection evolves constantly. Stay sharp, adapt and never get complacent. Knowledge is power, but application is key.
Use this wisely and may your carding endeavors prosper. Now go make some fucking money.
d0ctrine out.
3zdown4zup
Newbie
- Joined
- 13.03.25
- Messages
- 2
- Reaction score
- 0
- Points
- 1
.
Welcome to another carding knowledge you didnt know you needed. Today were diving into the dirty world of proxy providers and how to get every last drop of value out of their so called “clean” IPs.
You see most of you noobs think youve hit the jackpot when you find a residential proxy provider that hasnt been used to death by every script kiddie with a stolen credit card. But heres the truth: even the cleanest pools get dirtier and unusable after awhile.
The secret? Its not about finding virgin IPs. Its about understanding how these proxy providers work and exploiting their weaknesses. Were talking DNS manipulation sneaky little tricks that let you get past their blocks and restrictions.
This isnt some ‘5 Easy Steps to Card Amazon crap. Were going deep into the technical weeds exploring how to bypass URL blocks on financial sites like Stripe and PayPal. By the end of this guide youll be seeing residential proxies in a whole new light.
So put on your thinking cap and leave your preconceptions at the door. Its time to learn how to turn those ‘clean IPs into your personal playground. This is advanced stuff but if youve got more than two brain cells to rub together youll manage. Lets fucking go!
How IPs Get Dirty
So why are your clean proxies failing? We need to look at how proxy providers manage their IP pools. They have huge lists of IP addresses they sell to their customers as proxies.
When a provider gets a new batch of IPs, they are clean and unused. But that doesnt last long. As soon as those IPs become available, they get used by various customers, including carders doing fraudulent transactions.
The problem is the sheer number of users all hitting the same websites with fraudulent activity. Each failed attempt, chargeback or suspicious transaction on an IP address leaves a mark. Those marks add up fast and degrade the IP.
The IP you just connected to has likely been used by numerous other carders before you. They may have attempted to card various e-commerce sites or used payment processors like Stripe for shady transactions. All of these activities leave digital footprints that raise flags in security systems.
This is why you can run an IP through IPQS or Scamalytics, get a clean result and still have your orders declined. Those surface level checks dont show the full history of suspicious activity on that IP across different platforms.
An IP can go bad fast. An IP that was clean in the morning can be compromised by the afternoon due to other users. This cycle of use and abuse makes it harder to find truly clean IPs. When a proxy provider gets a reputation for having a clean pool, more users come in and the IP quality decreases faster.
So when your order gets flagged despite using a supposedly 'clean' proxy, remember that youre not just up against fraud detection systems. Youre also contending with the cumulative impact of every failed carding attempt that preceded yours on that IP.
The Solution
The solution to this IP quality issue is simple: use proxy providers that block financial sites. These providers, that cater to more legitimate use cases, block payment processors and financial institutions. This limitation, while inconvenient, is a goldmine for us.
Why? Because these restrictions create a shield, preventing other carders from tainting the IP pool. If the proxy doesnt allow connections to Stripe, PayPal or Adyen, it means no one has used these IPs for fraudulent transactions on these platforms. The result? IP addresses that remain clean in the eyes of payment providers and fraud detection systems.
This approach gives us a significant advantage. Were no longer playing Russian roulette with IPs that have been abused by every Tom Dick and Harry trying to card their way to a new PlayStation. Instead were working with IPs that have a clean slate when it comes to financial transactions.
But d0ctrine if these proxy providers dont allow access to Stripe, PayPal, Adyen etc how can we use them? Good question. The answer is in some DNS magic.
By using specific DNS tricks we can bypass these restrictions while still benefiting from the clean reputation of these IPs. This method allows us to access the sites we need while maintaining the pristine status of our proxy IPs.
DNS
To understand how we can get around these financial site blocks we need to understand DNS (Domain Name System) and how it interacts with different proxy types.
DNS is the internets phonebook, it translates human readable domain names into IP addresses that computers use. Most proxy providers implement their URL blocks at the DNS level. They’re not blocking financial sites IP addresses directly, but blocking their DNS resolvers from translating certain domain names.
For example when a proxy tries to access api.stripe.com the providers DNS resolver returns a blank instead of Stripes actual IP address. That’s why you can’t access these sites through these ‘clean’ proxies under normal circumstances.
View attachment 5976
Here’s where proxy types come in. With HTTP proxies DNS resolution happens on the proxy server side, making it hard to get around their blocks. But with SOCKS5 proxies we have a golden opportunity.
SOCKS5 proxies operate at a lower network level, we have more flexibility in how traffic is handled. By default you’re using the proxy’s DNS resolver. But - and this is the key - with SOCKS5 we can change that. We can configure our system to use a different DNS resolver, one that doesn’t have these blocks in place.
So we can use these clean, untainted SOCKS5 proxies and still access the financial sites we need. We’re basically bypassing the proxy’s phonebook and using our own.
The Process
Now that we covered the theory let’s get into the nitty gritty of actually implementing this bypass. You’ll need three things:
- An antidetect browser with DNS changing capabilities
- A proxy provider that blocks financial sites
- A reliable external DNS resolver
For antidetect browsers GoLogin and Linken Sphere are good options. Both have DNS configuration options for our method.
For proxy providers look for ones that block financial sites. Oxylabs and IPRoyal are good examples. Their restrictions which are usually a pain in the ass become our advantage in this scenario.
For our external DNS we’ll use Cloudflare’s resolver (1.1.1.1). It’s fast, reliable and most importantly not associated with any proxy services.
Here’s the step-by-step process:
When you hit api.stripe.com, you should see a JSON response that looks like this:
- Set up your antidetect profile:
- Launch your antidetect browser (GoLogin or Linken Sphere)
- Create a new browser profile
- In the network settings find the DNS configuration option
- Enter Cloudflares DNS: 1.1.1.1 and 1.0.0.1 as primary and secondary
- Configure your SOCKS5 proxy:
- Ensure 'Use proxy DNS' is disabled - this is crucial
- In the same profile settings locate the proxy configuration
- Select SOCKS5 as the proxy type
- Enter the details provided by your proxy service (Oxylabs or IPRoyal)
- Test your setup:
- Launch the browser profile
- Visit ipleak.net to confirm youre using the proxy IP
- Try accessing api.stripe.com
* Hidden text: cannot be quoted. *
This response is exactly what we want to see. It means youve successfully connected to Stripes API server despite the proxy provider blocking it. The error message is irrelevant - were not trying to make a valid API call. Whats important is that you received a response from Stripe at all.
If you see this message, congratu-fucking-lations. Youve just bypassed the proxy providers DNS block. Youre now connecting to Stripe through an IP that should, by all accounts, be unable to reach it.
If you dont see this message and instead get a connection error or timeout, somethings off. Double-check your DNS settings and proxy configuration. Make sure 'Use proxy DNS' is disabled and that youre using a SOCKS5 proxy, not HTTP.
From here on out, you potentially have a clean IP address for your carding operations. However, dont get cocky just yet. While this method ensures your IP hasnt been used for financial fraud, it doesnt guarantee overall cleanliness.
Double-check your IP with services like IPQS and Scamalytics. Just because its clean with payment processors doesnt mean its clean across the board. These IPs could still have been used for other shit like botnets or spam campaigns.
Closing Thoughts
We just armed you with a method to access cleaner IPs, but this aint no silver bullet. Its a tool that demands skill and vigilance.
Remember:
- Rotate IPs regularly
- Dont overuse this trick
- Maintain strict OPSEC
Fraud detection evolves constantly. Stay sharp, adapt and never get complacent. Knowledge is power, but application is key.
Use this wisely and may your carding endeavors prosper. Now go make some fucking money.
d0ctrine out.
Welcome to another carding knowledge you didnt know you needed. Today were diving into the dirty world of proxy providers and how to get every last drop of value out of their so called “clean” IPs.
You see most of you noobs think youve hit the jackpot when you find a residential proxy provider that hasnt been used to death by every script kiddie with a stolen credit card. But heres the truth: even the cleanest pools get dirtier and unusable after awhile.
The secret? Its not about finding virgin IPs. Its about understanding how these proxy providers work and exploiting their weaknesses. Were talking DNS manipulation sneaky little tricks that let you get past their blocks and restrictions.
This isnt some ‘5 Easy Steps to Card Amazon crap. Were going deep into the technical weeds exploring how to bypass URL blocks on financial sites like Stripe and PayPal. By the end of this guide youll be seeing residential proxies in a whole new light.
So put on your thinking cap and leave your preconceptions at the door. Its time to learn how to turn those ‘clean IPs into your personal playground. This is advanced stuff but if youve got more than two brain cells to rub together youll manage. Lets fucking go!
How IPs Get Dirty
So why are your clean proxies failing? We need to look at how proxy providers manage their IP pools. They have huge lists of IP addresses they sell to their customers as proxies.
When a provider gets a new batch of IPs, they are clean and unused. But that doesnt last long. As soon as those IPs become available, they get used by various customers, including carders doing fraudulent transactions.
The problem is the sheer number of users all hitting the same websites with fraudulent activity. Each failed attempt, chargeback or suspicious transaction on an IP address leaves a mark. Those marks add up fast and degrade the IP.
The IP you just connected to has likely been used by numerous other carders before you. They may have attempted to card various e-commerce sites or used payment processors like Stripe for shady transactions. All of these activities leave digital footprints that raise flags in security systems.
This is why you can run an IP through IPQS or Scamalytics, get a clean result and still have your orders declined. Those surface level checks dont show the full history of suspicious activity on that IP across different platforms.
An IP can go bad fast. An IP that was clean in the morning can be compromised by the afternoon due to other users. This cycle of use and abuse makes it harder to find truly clean IPs. When a proxy provider gets a reputation for having a clean pool, more users come in and the IP quality decreases faster.
So when your order gets flagged despite using a supposedly 'clean' proxy, remember that youre not just up against fraud detection systems. Youre also contending with the cumulative impact of every failed carding attempt that preceded yours on that IP.
The Solution
The solution to this IP quality issue is simple: use proxy providers that block financial sites. These providers, that cater to more legitimate use cases, block payment processors and financial institutions. This limitation, while inconvenient, is a goldmine for us.
Why? Because these restrictions create a shield, preventing other carders from tainting the IP pool. If the proxy doesnt allow connections to Stripe, PayPal or Adyen, it means no one has used these IPs for fraudulent transactions on these platforms. The result? IP addresses that remain clean in the eyes of payment providers and fraud detection systems.
This approach gives us a significant advantage. Were no longer playing Russian roulette with IPs that have been abused by every Tom Dick and Harry trying to card their way to a new PlayStation. Instead were working with IPs that have a clean slate when it comes to financial transactions.
But d0ctrine if these proxy providers dont allow access to Stripe, PayPal, Adyen etc how can we use them? Good question. The answer is in some DNS magic.
By using specific DNS tricks we can bypass these restrictions while still benefiting from the clean reputation of these IPs. This method allows us to access the sites we need while maintaining the pristine status of our proxy IPs.
DNS
To understand how we can get around these financial site blocks we need to understand DNS (Domain Name System) and how it interacts with different proxy types.
DNS is the internets phonebook, it translates human readable domain names into IP addresses that computers use. Most proxy providers implement their URL blocks at the DNS level. They’re not blocking financial sites IP addresses directly, but blocking their DNS resolvers from translating certain domain names.
For example when a proxy tries to access api.stripe.com the providers DNS resolver returns a blank instead of Stripes actual IP address. That’s why you can’t access these sites through these ‘clean’ proxies under normal circumstances.
View attachment 5976
Here’s where proxy types come in. With HTTP proxies DNS resolution happens on the proxy server side, making it hard to get around their blocks. But with SOCKS5 proxies we have a golden opportunity.
SOCKS5 proxies operate at a lower network level, we have more flexibility in how traffic is handled. By default you’re using the proxy’s DNS resolver. But - and this is the key - with SOCKS5 we can change that. We can configure our system to use a different DNS resolver, one that doesn’t have these blocks in place.
So we can use these clean, untainted SOCKS5 proxies and still access the financial sites we need. We’re basically bypassing the proxy’s phonebook and using our own.
The Process
Now that we covered the theory let’s get into the nitty gritty of actually implementing this bypass. You’ll need three things:
- An antidetect browser with DNS changing capabilities
- A proxy provider that blocks financial sites
- A reliable external DNS resolver
For antidetect browsers GoLogin and Linken Sphere are good options. Both have DNS configuration options for our method.
For proxy providers look for ones that block financial sites. Oxylabs and IPRoyal are good examples. Their restrictions which are usually a pain in the ass become our advantage in this scenario.
For our external DNS we’ll use Cloudflare’s resolver (1.1.1.1). It’s fast, reliable and most importantly not associated with any proxy services.
Here’s the step-by-step process:
When you hit api.stripe.com, you should see a JSON response that looks like this:
- Set up your antidetect profile:
- Launch your antidetect browser (GoLogin or Linken Sphere)
- Create a new browser profile
- In the network settings find the DNS configuration option
- Enter Cloudflares DNS: 1.1.1.1 and 1.0.0.1 as primary and secondary
- Configure your SOCKS5 proxy:
- Ensure 'Use proxy DNS' is disabled - this is crucial
- In the same profile settings locate the proxy configuration
- Select SOCKS5 as the proxy type
- Enter the details provided by your proxy service (Oxylabs or IPRoyal)
- Test your setup:
- Launch the browser profile
- Visit ipleak.net to confirm youre using the proxy IP
- Try accessing api.stripe.com
* Hidden text: cannot be quoted. *
This response is exactly what we want to see. It means youve successfully connected to Stripes API server despite the proxy provider blocking it. The error message is irrelevant - were not trying to make a valid API call. Whats important is that you received a response from Stripe at all.
If you see this message, congratu-fucking-lations. Youve just bypassed the proxy providers DNS block. Youre now connecting to Stripe through an IP that should, by all accounts, be unable to reach it.
If you dont see this message and instead get a connection error or timeout, somethings off. Double-check your DNS settings and proxy configuration. Make sure 'Use proxy DNS' is disabled and that youre using a SOCKS5 proxy, not HTTP.
From here on out, you potentially have a clean IP address for your carding operations. However, dont get cocky just yet. While this method ensures your IP hasnt been used for financial fraud, it doesnt guarantee overall cleanliness.
Double-check your IP with services like IPQS and Scamalytics. Just because its clean with payment processors doesnt mean its clean across the board. These IPs could still have been used for other shit like botnets or spam campaigns.
Closing Thoughts
We just armed you with a method to access cleaner IPs, but this aint no silver bullet. Its a tool that demands skill and vigilance.
Remember:
- Rotate IPs regularly
- Dont overuse this trick
- Maintain strict OPSEC
Fraud detection evolves constantly. Stay sharp, adapt and never get complacent. Knowledge is power, but application is key.
Use this wisely and may your carding endeavors prosper. Now go make some fucking money.
d0ctrine out.