𝗘𝗠𝗩 𝗧𝗨𝗧𝗢𝗥𝗜𝗔𝗟: 𝗛𝗢𝗪 𝗧𝗢 𝗘𝗡𝗖𝗢𝗗𝗘 𝗔 𝗕𝗟𝗔𝗡𝗞 𝗖𝗔𝗥𝗗 𝟮𝟬𝟮𝟰

[Easycredit]

EMV TUTORIAL: HOW TO ENCODE A BLANK CARD 2024
written by: Easycredit

Required Equipment:

1. Omnikey (for writing the chip data on the card)
2. Magnetic Stripe Card Reader (I recommend the Msr605x)
3. Computer/Laptop
4. Blank card (J2a040 and Unfused)

^^ All the equipment listed above can be found online, like at Amazon for example. ^^

5. Track data. Which should be like this for the track1:
4300232765346056^SURNAME/NAME^ 31052500837291034845

The corresponding track2 should look like this:
4300232765346056= 31052500837291034845

6. Software (MSRX, ARQC Gen, Cardpeek, X2a, Jcop English and ATR Tool 2.0)

If you're sure you have all the correct required equipment, we can start swiping.

Instructions:

To view the content, you need to Sign In or Register.

 

[pomfri]

EMV TUTORIAL: HOW TO ENCODE A BLANK CARD 2024
written by: Easycredit

Required Equipment:

1. Omnikey (for writing the chip data on the card)
2. Magnetic Stripe Card Reader (I recommend the Msr605x)
3. Computer/Laptop
4. Blank card (J2a040 and Unfused)

^^ All the equipment listed above can be found online, like at Amazon for example. ^^

5. Track data. Which should be like this for the track1:
4300232765346056^SURNAME/NAME^ 31052500837291034845

The corresponding track2 should look like this:
4300232765346056= 31052500837291034845

6. Software (MSRX, ARQC Gen, Cardpeek, X2a, Jcop English and ATR Tool 2.0)

If you're sure you have all the correct required equipment, we can start swiping.

Instructions:

* Hidden text: cannot be quoted. *

thanks

 

[DontTreadOnMe3]

this is good stuff

 

[charade88888]

EMV TUTORIAL: HOW TO ENCODE A BLANK CARD 2024
written by: Easycredit

Required Equipment:

1. Omnikey (for writing the chip data on the card)
2. Magnetic Stripe Card Reader (I recommend the Msr605x)
3. Computer/Laptop
4. Blank card (J2a040 and Unfused)

^^ All the equipment listed above can be found online, like at Amazon for example. ^^

5. Track data. Which should be like this for the track1:
4300232765346056^SURNAME/NAME^ 31052500837291034845

The corresponding track2 should look like this:
4300232765346056= 31052500837291034845

6. Software (MSRX, ARQC Gen, Cardpeek, X2a, Jcop English and ATR Tool 2.0)

If you're sure you have all the correct required equipment, we can start swiping.

Instructions:
* Hidden text: cannot be quoted. *

Very cool

 

[Asuser5000]

EMV TUTORIAL: HOW TO ENCODE A BLANK CARD 2024
written by: Easycredit

Required Equipment:

1. Omnikey (for writing the chip data on the card)
2. Magnetic Stripe Card Reader (I recommend the Msr605x)
3. Computer/Laptop
4. Blank card (J2a040 and Unfused)

^^ All the equipment listed above can be found online, like at Amazon for example. ^^

5. Track data. Which should be like this for the track1:
4300232765346056^SURNAME/NAME^ 31052500837291034845

The corresponding track2 should look like this:
4300232765346056= 31052500837291034845

6. Software (MSRX, ARQC Gen, Cardpeek, X2a, Jcop English and ATR Tool 2.0)

If you're sure you have all the correct required equipment, we can start swiping.

Instructions:
* Hidden text: cannot be quoted. *

Thanks

 

[motion1111]

ty bro

 

[bigbaginmyhand]

EMV TUTORIAL: HOW TO ENCODE A BLANK CARD 2024
written by: Easycredit

Required Equipment:

1. Omnikey (for writing the chip data on the card)
2. Magnetic Stripe Card Reader (I recommend the Msr605x)
3. Computer/Laptop
4. Blank card (J2a040 and Unfused)

^^ All the equipment listed above can be found online, like at Amazon for example. ^^

5. Track data. Which should be like this for the track1:
4300232765346056^SURNAME/NAME^ 31052500837291034845

The corresponding track2 should look like this:
4300232765346056= 31052500837291034845

6. Software (MSRX, ARQC Gen, Cardpeek, X2a, Jcop English and ATR Tool 2.0)

If you're sure you have all the correct required equipment, we can start swiping.

Instructions:
* Hidden text: cannot be quoted. *

What if you dont have name?

 

[Easycredit]

What if you dont have name?

In that case leave the "cardholders" name tab blank

 

[bigbaginmyhand]

In that case leave the "cardholders" name tab blank

A few questions:

1) Should you check the "Track 1 Discretion Data" box and write the track one? I have seen other tutorials and they have all said to do that. - If you do click it and put the track 1 in there how would you write the track 1 without the name? An example would help.

2) This kind of goes along with question 1, is the only thing you need to hit an ATM the track 2 written onto the card and you don't need the track one? I have heard you don't need it but its better to have.

3) I plan to hit ATM's, what would be good ATM's to hit? - Should I look for older ones? Or maybe a certain bank or ATM brand is good? I have heard a story on this forum where a guy tried to clone his own Bancorp Chime card and went to a chime ATM inside a CVS and it didn't work, so he went to a PNC bank ATM and it did work. It didn't specify how old the ATM's were though. Any suggestions on good ones to go to?

4) If you don't have the name, should you click "Erase Holdername" or should you just leave it blank like you said?

5) With IST files, is there a such thing as "generic IST files" where it works for the normal cards for the bank, or does it HAVE to be an IST with the matching bin?

6) With the ARQC area, what should you do with ARQC 2 and 3? Are those needed? I have seen other tutorials where they say to generate them in ARQC gen by changing the ATC from 0001, to 0002 for ARQC 2, and 0003 for ARQC 3.

Thank you for the help, I really appreciate it!!

 

[hxrty]

EMV TUTORIAL: HOW TO ENCODE A BLANK CARD 2024
written by: Easycredit

Required Equipment:

1. Omnikey (for writing the chip data on the card)
2. Magnetic Stripe Card Reader (I recommend the Msr605x)
3. Computer/Laptop
4. Blank card (J2a040 and Unfused)

^^ All the equipment listed above can be found online, like at Amazon for example. ^^

5. Track data. Which should be like this for the track1:
4300232765346056^SURNAME/NAME^ 31052500837291034845

The corresponding track2 should look like this:
4300232765346056= 31052500837291034845

6. Software (MSRX, ARQC Gen, Cardpeek, X2a, Jcop English and ATR Tool 2.0)

If you're sure you have all the correct required equipment, we can start swiping.

Instructions:
* Hidden text: cannot be quoted. *

nice

 

[Easycredit]

A few questions:

1) Should you check the "Track 1 Discretion Data" box and write the track one? I have seen other tutorials and they have all said to do that. - If you do click it and put the track 1 in there how would you write the track 1 without the name? An example would help.

2) This kind of goes along with question 1, is the only thing you need to hit an ATM the track 2 written onto the card and you don't need the track one? I have heard you don't need it but its better to have.

3) I plan to hit ATM's, what would be good ATM's to hit? - Should I look for older ones? Or maybe a certain bank or ATM brand is good? I have heard a story on this forum where a guy tried to clone his own Bancorp Chime card and went to a chime ATM inside a CVS and it didn't work, so he went to a PNC bank ATM and it did work. It didn't specify how old the ATM's were though. Any suggestions on good ones to go to?

4) If you don't have the name, should you click "Erase Holdername" or should you just leave it blank like you said?

5) With IST files, is there a such thing as "generic IST files" where it works for the normal cards for the bank, or does it HAVE to be an IST with the matching bin?

6) With the ARQC area, what should you do with ARQC 2 and 3? Are those needed? I have seen other tutorials where they say to generate them in ARQC gen by changing the ATC from 0001, to 0002 for ARQC 2, and 0003 for ARQC 3.

Thank you for the help, I really appreciate it!!

1) No it's not required for this specific method. If you would write the track1 without a name it would be like this: 4300232765346056^/^ 31052500837291034845 but it would be pointless as the track1 would be rendered invalid without a full name.

2) Yes, some 201 dumps only include a track 2 which is only required.

3) Generally the older the ATM the better, also looking for ATMs that do have not that many cameras hanging around would be useful as well.

4) Both options work.

5) The IST has to match with the bin. Otherwise, it won't work

6) You can do multiple if you like, for this method I did one.

I hope to have informed you enough about this. If you need any additional help contact me at Easycredit on telegram, we respond faster there.

 

[lowridah]

nice thanks

 

[PnutPres]

EMV TUTORIAL: HOW TO ENCODE A BLANK CARD 2024
written by: Easycredit

Required Equipment:

1. Omnikey (for writing the chip data on the card)
2. Magnetic Stripe Card Reader (I recommend the Msr605x)
3. Computer/Laptop
4. Blank card (J2a040 and Unfused)

^^ All the equipment listed above can be found online, like at Amazon for example. ^^

5. Track data. Which should be like this for the track1:
4300232765346056^SURNAME/NAME^ 31052500837291034845

The corresponding track2 should look like this:
4300232765346056= 31052500837291034845

6. Software (MSRX, ARQC Gen, Cardpeek, X2a, Jcop English and ATR Tool 2.0)

If you're sure you have all the correct required equipment, we can start swiping.

Instructions:
* Hidden text: cannot be quoted. *

lets see

 

[wapo]

EMV TUTORIAL: HOW TO ENCODE A BLANK CARD 2024
written by: Easycredit

Required Equipment:

1. Omnikey (for writing the chip data on the card)
2. Magnetic Stripe Card Reader (I recommend the Msr605x)
3. Computer/Laptop
4. Blank card (J2a040 and Unfused)

^^ All the equipment listed above can be found online, like at Amazon for example. ^^

5. Track data. Which should be like this for the track1:
4300232765346056^SURNAME/NAME^ 31052500837291034845

The corresponding track2 should look like this:
4300232765346056= 31052500837291034845

6. Software (MSRX, ARQC Gen, Cardpeek, X2a, Jcop English and ATR Tool 2.0)

If you're sure you have all the correct required equipment, we can start swiping.

Instructions:
* Hidden text: cannot be quoted. *

ty

 

[chukaku333]

thx

EMV TUTORIAL: HOW TO ENCODE A BLANK CARD 2024
written by: Easycredit

Required Equipment:

1. Omnikey (for writing the chip data on the card)
2. Magnetic Stripe Card Reader (I recommend the Msr605x)
3. Computer/Laptop
4. Blank card (J2a040 and Unfused)

^^ All the equipment listed above can be found online, like at Amazon for example. ^^

5. Track data. Which should be like this for the track1:
4300232765346056^SURNAME/NAME^ 31052500837291034845

The corresponding track2 should look like this:
4300232765346056= 31052500837291034845

6. Software (MSRX, ARQC Gen, Cardpeek, X2a, Jcop English and ATR Tool 2.0)

If you're sure you have all the correct required equipment, we can start swiping.

Instructions:
* Hidden text: cannot be quoted. *

!

 

[jakes1215]

EMV TUTORIAL: HOW TO ENCODE A BLANK CARD 2024
written by: Easycredit

Required Equipment:

1. Omnikey (for writing the chip data on the card)
2. Magnetic Stripe Card Reader (I recommend the Msr605x)
3. Computer/Laptop
4. Blank card (J2a040 and Unfused)

^^ All the equipment listed above can be found online, like at Amazon for example. ^^

5. Track data. Which should be like this for the track1:
4300232765346056^SURNAME/NAME^ 31052500837291034845

The corresponding track2 should look like this:
4300232765346056= 31052500837291034845

6. Software (MSRX, ARQC Gen, Cardpeek, X2a, Jcop English and ATR Tool 2.0)

If you're sure you have all the correct required equipment, we can start swiping.

Instructions:
* Hidden text: cannot be quoted. *

I need to learn this please

 

[Easycredit]

I need to learn this please

If you need any additional help please contact me at: https://t.me/easycred will be able to assist you there

 

[thatbatch562]

Thank you

 

[Daprincerairai28]

EMV TUTORIAL: HOW TO ENCODE A BLANK CARD 2024
written by: Easycredit

Required Equipment:

1. Omnikey (for writing the chip data on the card)
2. Magnetic Stripe Card Reader (I recommend the Msr605x)
3. Computer/Laptop
4. Blank card (J2a040 and Unfused)

^^ All the equipment listed above can be found online, like at Amazon for example. ^^

5. Track data. Which should be like this for the track1:
4300232765346056^SURNAME/NAME^ 31052500837291034845

The corresponding track2 should look like this:
4300232765346056= 31052500837291034845

6. Software (MSRX, ARQC Gen, Cardpeek, X2a, Jcop English and ATR Tool 2.0)

If you're sure you have all the correct required equipment, we can start swiping.

Instructions:
* Hidden text: cannot be quoted. *

Thanks

 

[coinmaster78]

how

EMV TUTORIAL: HOW TO ENCODE A BLANK CARD 2024
written by: Easycredit

Required Equipment:

1. Omnikey (for writing the chip data on the card)
2. Magnetic Stripe Card Reader (I recommend the Msr605x)
3. Computer/Laptop
4. Blank card (J2a040 and Unfused)

^^ All the equipment listed above can be found online, like at Amazon for example. ^^

5. Track data. Which should be like this for the track1:
4300232765346056^SURNAME/NAME^ 31052500837291034845

The corresponding track2 should look like this:
4300232765346056= 31052500837291034845

6. Software (MSRX, ARQC Gen, Cardpeek, X2a, Jcop English and ATR Tool 2.0)

If you're sure you have all the correct required equipment, we can start swiping.

Instructions:
* Hidden text: cannot be quoted. *

where do i get the x2a