Tips Definition of detections of a shop or payment

[Jaysu]

Today we will be puzzled by a very important thing - determining what a shop or service checks when we try to drive in. This will help to understand much better the reasons for possible declines and flaws in the configuration of our system or browser. These can be various fingerprints, WebGL parameters, and other such things. So, first, download the OpenWPM system from Github. This system is on a regular Ubuntu - if you want to understand it, there should be no problems. It was created to detect our audio prints.

After we have installed all the basic things, we need python modules for scanning, using javascript parsing. After completing these actions, in the end, a window becomes available to us, in which we enter the addresses of a shop, office or any other link of interest and get a database with js requests. This analysis of the AF system takes only a couple of minutes in time, and as a result, you will receive information about what the final site wants to receive - it can be a canvas, an audio print or something else. anti-fraud systems are developing at a very fast pace, and literally every day new detections appear. Installing python takes a few minutes, but before that we need to install the mozilla.

Next, open a terminal and enter the command:

Code:
git clone

We started cloning the system - it will take a little time, no more than 5 minutes.
The project has been successfully cloned.

As a result, we have a folder with the name of the product - go to it and execute the script ./install.sh

Next, the system asks about installing the flash player - we give the go-ahead, press Enter and start installing the scripts that we need for the python module. After the installation is complete, we need to check if everything is enough for further work with the analysis - we start the check by executing ./demo.py

If the script is successfully executed, then everything is ok at this stage, but often a problem may occur associated with a lack of administrator rights - in this case, execute sudo *. / Demo.py, followed by python ./demo.py. If after playing these actions we get such a window, then everything is fine:

Now we do a test run, and we have three browser windows open. We are waiting for the necessary files-tools for our work to be loaded - we are waiting for their closing. After that, open the following file: namo demo.py

If everything was done correctly at the previous stage.

To view the content, you need to Sign In or Register.

I hope that thanks to this article you have learned something new and useful for yourself. In our business, you always need to develop, experiment and adapt to circumstances in time, and then there will be a profit!

All good, thank you for your attention.

 

[Theunknown79]

Today we will be puzzled by a very important thing - determining what a shop or service checks when we try to drive in. This will help to understand much better the reasons for possible declines and flaws in the configuration of our system or browser. These can be various fingerprints, WebGL parameters, and other such things. So, first, download the OpenWPM system from Github. This system is on a regular Ubuntu - if you want to understand it, there should be no problems. It was created to detect our audio prints.

After we have installed all the basic things, we need python modules for scanning, using javascript parsing. After completing these actions, in the end, a window becomes available to us, in which we enter the addresses of a shop, office or any other link of interest and get a database with js requests. This analysis of the AF system takes only a couple of minutes in time, and as a result, you will receive information about what the final site wants to receive - it can be a canvas, an audio print or something else. anti-fraud systems are developing at a very fast pace, and literally every day new detections appear. Installing python takes a few minutes, but before that we need to install the mozilla.

Next, open a terminal and enter the command:

Code:
git clone

We started cloning the system - it will take a little time, no more than 5 minutes.
The project has been successfully cloned.

As a result, we have a folder with the name of the product - go to it and execute the script ./install.sh

Next, the system asks about installing the flash player - we give the go-ahead, press Enter and start installing the scripts that we need for the python module. After the installation is complete, we need to check if everything is enough for further work with the analysis - we start the check by executing ./demo.py

If the script is successfully executed, then everything is ok at this stage, but often a problem may occur associated with a lack of administrator rights - in this case, execute sudo *. / Demo.py, followed by python ./demo.py. If after playing these actions we get such a window, then everything is fine:

Now we do a test run, and we have three browser windows open. We are waiting for the necessary files-tools for our work to be loaded - we are waiting for their closing. After that, open the following file: namo demo.py

If everything was done correctly at the previous stage.
* Hidden text: cannot be quoted. *

I hope that thanks to this article you have learned something new and useful for yourself. In our business, you always need to develop, experiment and adapt to circumstances in time, and then there will be a profit!

All good, thank you for your attention.

G

 

[khoa123]

ok

 

[Loki999999]

Hoy nos sorprenderá una cosa muy importante: determinar qué comprueba una tienda o servicio cuando intentamos entrar. Esto ayudará a comprender mucho mejor las razones de posibles fallos y fallos en la configuración de nuestro sistema o navegador. Pueden ser varias huellas digitales, parámetros WebGL y otras cosas similares. Entonces, primero, descargue el sistema OpenWPM desde Github. Este sistema está en un Ubuntu normal; si quieres entenderlo, no debería haber problemas. Fue creado para detectar nuestras huellas de audio.

Una vez que hayamos instalado todas las cosas básicas, necesitamos módulos de Python para escanear, utilizando el análisis de JavaScript. Luego de realizar estas acciones, al final, queda a nuestra disposición una ventana, en la que ingresamos las direcciones de una tienda, oficina o cualquier otro enlace de interés y obtenemos una base de datos con solicitudes js. Este análisis del sistema AF toma solo un par de minutos y, como resultado, recibirá información sobre lo que el sitio final quiere recibir: puede ser un lienzo, una impresión de audio u otra cosa. Los sistemas antifraude se están desarrollando a un ritmo muy rápido y, literalmente, cada día aparecen nuevas detecciones. La instalación de Python lleva unos minutos, pero antes debemos instalar Mozilla.

A continuación, abra una terminal e ingrese el comando:

Código:
clon de git

Comenzamos a clonar el sistema; nos llevará un poco de tiempo, no más de 5 minutos.
El proyecto ha sido clonado con éxito.

Como resultado, tenemos una carpeta con el nombre del producto; vaya a ella y ejecute el script ./install.sh

A continuación, el sistema pregunta sobre la instalación del reproductor Flash: le damos luz verde, presionamos Enter y comenzamos a instalar los scripts que necesitamos para el módulo Python. Una vez completada la instalación, debemos verificar si todo es suficiente para seguir trabajando con el análisis; comenzamos la verificación ejecutando ./demo.py

Si el script se ejecuta correctamente, entonces todo está bien en esta etapa, pero a menudo puede surgir un problema asociado con la falta de derechos de administrador; en este caso, ejecute sudo *. /Demo.py, seguido de python ./demo.py. Si después de realizar estas acciones nos aparece esa ventana, entonces todo está bien:

Ahora hacemos una prueba y tenemos tres ventanas del navegador abiertas. Estamos esperando que se carguen los archivos-herramientas necesarios para nuestro trabajo, estamos esperando su cierre. Después de eso, abra el siguiente archivo: namo demo.py

Si todo se hizo correctamente en la etapa anterior.
* Texto oculto: no se puede citar. *

Espero que gracias a este artículo hayas aprendido algo nuevo y útil para ti. En nuestro negocio, siempre es necesario desarrollar, experimentar y adaptarse a las circunstancias en el tiempo, ¡y luego habrá ganancias!

Todo bien, gracias por su atención.

t

 

[tyranttt]

lets try this out
lets try this out

 

[rider424]

Today we will be puzzled by a very important thing - determining what a shop or service checks when we try to drive in. This will help to understand much better the reasons for possible declines and flaws in the configuration of our system or browser. These can be various fingerprints, WebGL parameters, and other such things. So, first, download the OpenWPM system from Github. This system is on a regular Ubuntu - if you want to understand it, there should be no problems. It was created to detect our audio prints.

After we have installed all the basic things, we need python modules for scanning, using javascript parsing. After completing these actions, in the end, a window becomes available to us, in which we enter the addresses of a shop, office or any other link of interest and get a database with js requests. This analysis of the AF system takes only a couple of minutes in time, and as a result, you will receive information about what the final site wants to receive - it can be a canvas, an audio print or something else. anti-fraud systems are developing at a very fast pace, and literally every day new detections appear. Installing python takes a few minutes, but before that we need to install the mozilla.

Next, open a terminal and enter the command:

Code:
git clone

We started cloning the system - it will take a little time, no more than 5 minutes.
The project has been successfully cloned.

As a result, we have a folder with the name of the product - go to it and execute the script ./install.sh

Next, the system asks about installing the flash player - we give the go-ahead, press Enter and start installing the scripts that we need for the python module. After the installation is complete, we need to check if everything is enough for further work with the analysis - we start the check by executing ./demo.py

If the script is successfully executed, then everything is ok at this stage, but often a problem may occur associated with a lack of administrator rights - in this case, execute sudo *. / Demo.py, followed by python ./demo.py. If after playing these actions we get such a window, then everything is fine:

Now we do a test run, and we have three browser windows open. We are waiting for the necessary files-tools for our work to be loaded - we are waiting for their closing. After that, open the following file: namo demo.py

If everything was done correctly at the previous stage.
* Hidden text: cannot be quoted. *

I hope that thanks to this article you have learned something new and useful for yourself. In our business, you always need to develop, experiment and adapt to circumstances in time, and then there will be a profit!

All good, thank you for your attention.

Thx